User Manual

User's Guide MADIface XT © RME

19.5 Setup Menu

SETUP offers several options to configure the device. Encoder 1 changes between Options and

Setups. The sub-menus in Options, General Settings, Digital Routing, Clock and MIDI Sources,

are accessed with encoder 2.

19.5.1 Options Menu

The page Clock has the following entries:

Clock Source

Only adjustable in stand-alone mode! Choices are INT (Internal, Master), WCK (word clock),

AES, MADI 1 to 3.

Sample Rate

Choices are 32, 44.1, 48, 64, 88.2, 96, 128, 176.4 and 192 kHz.

Setting the correct sample rate is even necessary in slave mode,

with external clocking via word or one of the digital inputs. Only

with AES the real current sample rate can be detected. With

MADI the user has to inform the unit, whether the input signal is

in the single, double or quad speed range.

WCK Alw. Singl

Word Clock Always Single Speed. Choices are On or Off.

WCK Term.

Word clock termination for the word clock input – On or Off.

These options are explained in detail in chapter 19.6.

The page Hardware Diagnosis has the following entries:

AES State Pro

On – channel status Professional. Off – channel status Consumer.

Standalon. MIDI

Device reacts on MIDI commands when in stand-alone mode: On

or Off.

Interface Mode

Available options: Auto, PCIe, USB 3, USB 2. In USB 2 mode the

number of transmitted channels is reduced to 70.

LCD Contrast

Adjusting the contrast of the display.

Test Results

Please ignore. No user related data.

SW Version

Shows the current version number and date of the internal DSP software.