User Manual

User's Guide MADIface XT © RME
77
Device Handling
¾ Always init DSP devices with TotalMix FX settings. Not supported by the hardware.
¾ Count MADI Channels per port. Channels shown in TotalMix are counted 1 to 64 three
times.
¾ Disable ASIO Direct Monitoring. Disables ASIO Direct Monitoring (ADM) for the MADI-
face XT within TotalMix FX.
Graphics
¾ Use D2D (Change requires restart). Default on. Can be deactivated to use a compatible
but CPU-taxing graphics mode, in case graphics problems show up.
¾ Brightness correction. Set TotalMix FX screen brightness to your taste, matching the
monitor setting or the environment.
Store Setting for (Windows only)
¾ All Users (Restart required). See next chapter.
Special Options
¾ Lock User Interface. Default off. Can be activated to freeze the current mix state. Faders,
buttons and knobs relating to the mix state can not be moved anymore.
25.7.1 Store for Current or All Users (Windows)
TotalMix FX stores all settings, workspaces and snapshots for the current user in:
XP: C:\Documents and Settings\ Username\Local Settings\ Application Data\TotalMixFX
Since Vista: C.\Users\Username\AppData\Local\TotalMixFX
Current User ensures that when workstations are used by several people they all find their own
settings. In case the settings should be identical or given for any user, TotalMix FX can be
changed to use the All User directory. An admin could even write protect the file lastMADI-
faceXT1.xml, which results in a complete reset to that file’s content whenever TotalMix FX is
restarted. The xml-file is updated on exit, so simply set up TotalMix as desired and exit it (right
mouse click on the symbol in the notification area).