User Manual

78
User's Guide MADIface XT © RME
25.8 Settings
The dialog Settings can be opened via the Options menu or directly via F3.
25.8.1 Mixer Page
On the mixer page some typical settings for the mixer operation are set, like Talkback source,
Dim amount when Talkback is active, the stored main volume or the input used for the External
Input function.
Talkback
¾ Input. Selects the input channel of the
Talkback signal (microphone in control
room). Default: None.
¾ Dim. Amount of attenuation of the
signals routed to the Phones in dB.
Listenback
¾ Input. Selects the input channel of the
Listenback signal (microphone in
recording room). Default: None.
¾ Dim. Amount of attenuation of the
signals routed to the Main Out in dB.
Main Out
¾ Recall. User defined listening volume,
activated by the Recall button at the
unit or in TotalMix.
¾ Dim. Amount of attenuation for the
Main Out in dB.
¾ External Input. Selects the stereo
input that replaces the mix signal on
the Main Out when activated. The
volume of the stereo signal is adjusted
by the slider Gain.
PFL Mode
¾ Live Mode, PFL replaces Solo. PFL means Pre Fader Listening. This feature is very use-
ful when operating TotalMix in a live environment, as it allows to quickly listen/monitor any
of the inputs by hitting the Solo button. The monitoring happens on the output set for the
Cue signal via the Assign dialog.