User Manual

User’s Guide ADI-2 Pro - v 1.91

14. SETUP

The key Setup gives access to two top level screens: Options and Load/Store all Settings. Op-

tions has the subpages Hardware/Diagnosis, Device Mode, Clock.

14.1 Options

14.1.1 Hardware/Diagnosis

Subpage Hardware/Diagnosis, has the following entries:

SPDIF In

Available settings are: Auto, Coax, Optical. Default: Auto.

SRC (Sample Rate Converter)

Available settings are: Off, AES In, SPDIF In. Note: In case a DoP signal (DSD) is detected,

SRC is automatically switched off.

Optical Out

Available settings are: SPDIF, ADAT. While the input adapts to the received signal automati-

cally, the output needs to be switched manually. In Dig Thru mode with an ADAT signal re-

ceived, the output is switched to ADAT automatically with all 8 input channels passed through.

Dig. Out Source

Default, Main Out. Copies the signal Main Out 1/2 (including EQ and volume) to the digital out-

puts AES and SPDIF/ADAT. Useful when connecting active monitors with digital inputs.

Display Mode

Available settings are: Default, Dark. The dark scheme inverts the white background and black

numbers/text to black background and light-grey numbers/text.

Meter Color

Green, Cyan. Default: Green. Changes the color of the meter screens for PCM and DSD mode.

Remap Keys

OFF, ON. Default: OFF. Allows to assign 26 different functions/actions to the four function keys,

configurable via the following four entries:

VOL Key, I/O Key, EQ Key, SETUP Key. Available functions/actions:

Setup 1 to 9, Mono 1/2, Mono 3/4, Mono to L 1/2, Mono to L 3/4, Mute 1/2, Mute 3/4, Mute all,

Loudness 1/2, Loudness 3/4, EQ In 1/2, EQ Out 1/2, EQ Out 3/4, BT Out 1/2, BT Out 3/4,

EQ+B/T+Ld 1/2, EQ+B/T+Ld 3/4, Toggle Ph/Line.

The original function of the key, entering the menu, is still available by pushing the key for half a

second.

LCD Brightness

Adjustable from 20% to 100%. Default is 80%.

LCD Tint Control

Adjustable from -8 (yellow) to 8 (blue). Enables compensation of the display's colour deviation

as well as suiting the user's taste.

Test Results

Please ignore. For internal use only.

SW Version

Shows the current version number and date of the internal DSP software.