User Manual

User’s Guide Micstasy © RME
57
20.3 Table
No. No. Name
Set
Val.
Val.
Resp. Data bytes
00h 0 Ch. 1 Gain coarse x x 0..85 = -9..+76dB, 1dB steps
01h 1 Ch. 1 Gain fine x x (see gain fine settings table)
02h 2 Ch. 1 settings x x (see channel settings table)
03h 3 Ch. 2 Gain coarse x x 0..85 = -9..+76dB, 1dB steps
04h 4 Ch. 2 Gain fine x x (see gain fine settings table)
05h 5 Ch. 2 settings x x (see channel settings table)
06h 6 Ch. 3 Gain coarse x x 0..85 = -9..+76dB, 1dB steps
07h 7 Ch. 3 Gain fine x x (see gain fine settings table)
08h 8 Ch. 3 settings x x (see channel settings table)
09h 9 Ch. 4 Gain coarse x x 0..85 = -9..+76dB, 1dB steps
0Ah 10 Ch. 4 Gain fine x x (see gain fine settings table)
0Bh 11 Ch. 4 settings x x (see channel settings table)
0Ch 12 Ch. 5 Gain coarse x x 0..85 = -9..+76dB, 1dB steps
0Dh 13 Ch. 5 Gain fine x x (see gain fine settings table)
0Eh 14 Ch. 5 settings x x (see channel settings table)
0Fh 15 Ch. 6 Gain coarse x x 0..85 = -9..+76dB, 1dB steps
10h 16 Ch. 6 Gain fine x x (see gain fine settings table)
11h 17 Ch. 6 settings x x (see channel settings table)
12h 18 Ch. 7 Gain coarse x x 0..85 = -9..+76dB, 1dB steps
13h 19 Ch. 7 Gain fine x x (see gain fine settings table)
14h 20 Ch. 7 settings x x (see channel settings table)
15h 21 Ch. 8 Gain coarse x x 0..85 = -9..+76dB, 1dB steps
16h 22 Ch. 8 Gain fine x x (see gain fine settings table)
17h 23 Ch. 8 settings x x (see channel settings table)
18h 24 Setup 1 x x (see setup 1 table)
19h 25 Setup 2 x x (see setup 2 table)
1Ah 26 Lock / Sync Info x (see lock / sync table)
1Bh 27 Memory Save x 0 = idle, 1..8 save memory 1..8
1Ch 28 Memory Recall x 0 = idle, 1..8 recall memory 1..8
1Dh 29 Set Bank No. / Dev. ID x 00h..77h, 7Fh
1Eh 30 Oscillator x 0 = off, 1..8 = Channel 1..8
Gain Fine Settings
MSB
/ 7 0
(Channel 1) 6 Display auto dark: 0 = off, 1 = on
(Request only) 5
MSB /
3 Level: 0 = < -70dBFS peak
(Request only) 4 / 2
Level: 1..12 = < -60 / -50 / -42 / -36 / -30 /
-24 /
(Request only) 3 / 1 Level: -18 / -12 / -6 / -3 / -1 / -0.1 dBFS
(Request only) 2
LSB /
0 Level: 13 = > -0.1 dBFS (over)
(Channels 2…8) 1
AutoSet Link: 0 = off, 1 = link to lower
channel
Channel 1: digital out AES/ADAT
0 = analog, 1 = Option
LSB /
0 Gain fine: 0 = 0dB, 1 = +0.5dB