Manualshelf

Material Safety Data Sheet

ManualsBrandsRMR Brands ManualsBathroom CleanersComplete Mold Killer & Remover DIY Bundle - Kill, Clean and Prevent Mold & Mildew(1-32oz RMR 86, 1-32oz RMR-141 RTU & 2 Trigger sprayers)
12345678910
Page 5 / 10
Revision Date: New
RMR-86 Mold Stain & Mildew Stain Remover
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure Guidelines
Chemical Name
ACGIH TLV
OSHA PEL
NIOSH IDLH
Surfactants
Trade Secret
None
None
None
Sodium hypochlorite
7681-52-9
None
None
None
ACGIH TLV: American Conference of Governmental Industrial Hygienists - Threshold Limit Value. OSHA PEL: Occupational Safety and Health
Administration - Permissible Exposure Limits. NIOSH IDLH: Immediately Dangerous to Life or Health.
Appropriate engineering controls
Engineering Measures Showers
Eyewash stations
Ventilation systems
Individual protection measures, such as personal protective equipment
E ye/Face Protection If splashes are likely to occur: W ear safety glasses with side shields (or goggles) or face
shield.
Skin and Body Protection W ear rubber or neoprene gloves and protective clothing such as long-sleeved shirt.
Respiratory Protection If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA approved
respiratory protection should be worn. Positive-pressure supplied air respirators may be
required for high airborne contaminant concentrations. Respiratory protection must be
provided in accordance with current local regulations.
H ygiene Measures W ash hands after direct contact. Do not wear product-contaminated clothing for prolonged
periods. Remove and wash contaminated clothing before re-use. Do not eat, drink, or
smoke when using this product.