SDS

RMR-001 - RMR-86 Mold Stain & Mildew Stain Remover
Revision Date: 11-Aug-2022
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Page 3 / 8
Specific Hazards Arising from the Chemical
Combustion products may be toxic. Contacts with acids liberates toxic gas.
Hazardous combustion products Carbon monoxide. Carbon dioxide (CO2).
Protective equipment and precautions for firefighters
As in any fire, wear self
-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full
protective gear.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal Precautions
Use personal protective equipment as required. Keep unnecessary people away, isolate
hazard area and deny entry. Remove all sources of ignition.
For Emergency Responders
Contact with acids liberates toxic gas.
Environmental precautions
Environmental precautions
See Section 12 for additional Ecological Information.
Methods and material for containment and cleaning up
Methods for Containment
Prevent further leakage or spillage if safe to do so. Soak up and contain spill with an
absorbent material.
Methods for Clean-Up
Reclaim where possible. Sweep up absorbed material and shovel into suitable containers
for disposal.
7. HANDLING AND STORAGE
Precautions for safe handling
Advice on Safe Handling
Handle in accordance with good industrial hygiene and safety practice. Use personal
protective equipment as required. Wash face, hands and any exposed skin thoroughly after
ha
ndling. Avoid contact with skin, eyes or clothing. Wear appropriate personal protective
equipment.
Conditions for safe storage, including any incompatibilities
Storage Conditions
Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from
incompatible materials, open flames, and high temperatures.
Incompatible Materials
Strong oxidizing agents. Strong acids. Strong bases.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Guidelines
This product, as supplied, does not contain any hazardous materials with occupational
exposure limits established by the region specific regulatory bodies
Chemical name
ACGIH TLV
OSHA PEL
NIOSH IDLH
Proprietary alkalinity booster
Ceiling: 2 mg/m
3
TWA: 2 mg/m
3
(vacated) Ceiling: 2 mg/m
3
IDLH: 10 mg/m
3
Ceiling: 2 mg/m
3
Appropriate engineering controls
Engineering Controls
Maintain eye wash fountain and quick-drench facilities in work area.