Operating Instructions

OPERATING INSTRUCTIONS

Operation requires 3 “AA” 1.5V alkaline batteries (not included) for car and 2 “AA” alkaline batteries (not included)

for remote control.

1. Carefully remove items from package.

2. Locate the battery compartment on the back of each item (see diagram on right).

3. Swivel latches on bottom of car to release battery pack and insert batteries.

4. Switch the car button to “ON” position.

5. For best results, use the car on hard surfaces such as wood or tile.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device

may not cause harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

FCC ID:2ATYAUS72-0092

PAGE 1
OPERATING INSTRUCTIONS Operation requires 3 “AA” 1.5V alkaline batteries (not included) for car and 2 “AA” alkaline batteries (not included) for remote control. 1. Carefully remove items from package. 2. Locate the battery compartment on the back of each item (see diagram on right). 3. Swivel latches on bottom of car to release battery pack and insert batteries. 4. Switch the car button to “ON” position. 5. For best results, use the car on hard surfaces such as wood or tile.
PAGE 2