Datasheet

ManualsBrandsRND Components ManualsLEDsTHT LED White 3000K 1300mcd 3mm Cylindrical

White LED, 3 mm

Features

Parameters

Symbol Max. Unit

Device Selection Guide

Part No. Emitting Color Lens Color

RND 135-00207

Warm White

Water Clear

Notes:

a. Derate linearly as shown in derating curve.

b. Duty Factor = 10%, Frequency = 1 kHz.

c. Reverse voltage (VR) condition is applied for IR test only. The device is not designed for reverse operation.

Power Dissipation

85 mW

Peak Forward Current

(a)

100 mA

DC Forward Current

(b)

25 mA

Reverse Voltage

(c)

5 V

Operating Temperature Range T

opr

-40℃ to +80℃

Storage Temperature Range T

stg

-40

℃

to +85

℃

Soldering Temperature T

sld

260℃ for 5 Seconds

Absolute Maximum Ratings at Ta=25℃

Descriptions:

 The series is specially designed for applications requiring higher brightness.

 The phosphor filled in the reflector converts the blue emission of InGaN chip to ideal white.

 Low power consumption.

 General purpose leads.

 Versatile mounting on p.c. board or panel.

 I.C. compatible/low current requirement.

 High efficiency.

 Compliance with EU REACH.

 The product itself will remain within RoHS compliant Version.

Applications:

 Message panels / Optical Indicators / Backlighting / Marker Lights / Home appliance

Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T +41 44 944 99 11, info@distrelec.com, distrelec.com

Summary of content (8 pages)

PAGE 1
White LED, 3 mm Features  Low power consumption.  General purpose leads.  Versatile mounting on p.c. board or panel.  I.C. compatible/low current requirement.  High efficiency.  Compliance with EU REACH.  The product itself will remain within RoHS compliant Version. Applications:  Message panels / Optical Indicators / Backlighting / Marker Lights / Home appliance Descriptions:  The series is specially designed for applications requiring higher brightness.
PAGE 2
White LED, 3 mm Electrical Optical Characteristics at Ta 25℃ Parameters Symbol Min. Typ. Max. Unit Iv 780 1300 --- mcd IF=20mA 2θ1/2 --- 100 --- deg. IF=20mA x --- 0.43 --- IF=20mA y --- 0.40 --- IF=20mA Color Temperature CCT --- 3000 --- K IF=20mA Color Rendering Index CRI --- 80 --- Ra IF=20mA Forward Voltage VF 2.6 3.0 3.
PAGE 3
White LED, 3 mm Package Dimensions CATHODE ANODE POLARITY Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25 mm (.010″) unless otherwise noted. 3. Protruded resin under flange is 1.00mm (.039″) max. Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T +41 44 944 99 11, info@distrelec.com, distrelec.
PAGE 4
White LED, 3 mm Typical Electrical / Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) Forward Current & Forward Voltage Ta=25℃ Forward Current IF (mA) 75 50 25 0 300 1000 400 500 600 700 Wavelength λp (nm) 100 10 1 -60 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta ( ℃) 40 30 20 10 0 2.6 800 Luminous Intensity & Ambient Temperature Ta=25°C 50 100 Ta=25℃ 1000 f=1KHz Duty=1/10 100 10 1 0 10 Forward Current Derating Curve Forward Current IF (mA) 2.8 3.
PAGE 5
White LED, 3 mm CIE Chromaticity Diagram: 0.46 0.45 0.44 2800K 2930K 0.43 3050K 0.42 3200K 3400K 0.41 0.40 0.39 Y 4000K 3800K H1-3 H2-3 H2-2 H2-1 0.37 H3-3 H3-2 0.36 H3-1 I2-2 I3-4 I3-3 I3-2 I4-2 J1-2 J1-1 J2-1 J2-2 J2-3 J1-3 J1-4 J2-4 I2-4 J3-1 J3-2 J3-3 J4-1 J4-2 J4-3 J3-4 J4-4 I4-4 I3-1 H3-4 I1-3 I2-3 I2-1 H2-4 I1-4 I1-2 I1-1 H1-4 H1-2 H1-1 0.38 3600K 2300K 2500K 2400K 2700K 2600K I4-3 I4-1 H4-4 H4-3 H4-2 0.35 H4-1 0.34 0.33 0.32 0.36 0.37 0.38 0.
PAGE 6
White LED, 3 mm Bin Table Specification: Luminous Intensity Iv (mcd) IF@20mA Bin Code 17 18 19 20 Min 780 1000 1300 1700 Max. 1000 1300 1700 2200 Min 2.6 2.8 3.0 3.2 Max. 2.8 3.0 3.2 3.4 Note: Tolerance of each bin limit is ±15%. Forward Voltage VF (V) IF@20mA Bin Code B C D E Note: Forward Voltage Measurement allowance is ±0.2V. Chromaticity Coordinates, CC (x, y), IF@20mA Bin Code I2-1 I3-1 I2-2 I3-2 I2-3 I3-3 x y x y x y x y x y x y Chromaticity Coordinates, IF@20mA 0.415 0.424 0.431 0.387 0.
PAGE 7
White LED, 3 mm Cautions 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 The LEDs should be stored at 30°C or less and 70%RH or less after being shipped from RND and the storage life limits are 3 months. If the LEDs are stored for 3 months or more, they can be stored for a year in a sealed container with a nitrogen atmosphere and moisture absorbent material. 2.
PAGE 8
White LED, 3 mm (A) Recommended circuit (B) The brightness of each LED might appear different due to the differences in the I-V characteristics of those LEDs. 7. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 8. ESD (Electrostatic Discharge) Static Electricity or power surge will damage the LED.