Datasheet

ManualsBrandsRND Components ManualsLEDsSMD LED White 7500K 600mcd 0402

White SMD LED,

1x0.5mm

Features

Parameters

Symbol Max.

Unit

Device Selection Guide

Part No. Emitting Color Lens Color

RND 135-00244

Cool White

Yellow Diffused

Absolute Maximum Ratings at Ta=25℃

Descriptions:

 Much smaller than lead frame type components, thus enable smaller board size, higher packing

density, reduced storage space and finally smaller equipment to be obtained.

 Besides, lightweight makes them ideal for miniature applications, etc.

 Compatible with automatic placement equipment.

 Compatible with infrared and vapor phase reflow solder process.

 Mono-color type.

 The product itself will remain within RoHS compliant version.

Applications:

 Backlighting in dashboard and switch.

 Telecommunication: Indicator and backlighting in telephone and fax.

 Flat backlight for LCD, switch and symbol.

 General use.

Notes:

a. Derate linearly as shown in derating curve.

b. Duty Factor = 10%, Frequency = 1 kHz

Power Dissipation Pd

Peak Forward Current

(a)

IFP 100 mA

DC Forward Current

(b)

Reverse Voltage VR 5 V

Electrostatic Discharge (HBM) ESD

1000

Operating Temperature Range Topr -40℃ to +80℃

Storage Temperature Range Tstg -40℃ to +85℃

Soldering Temperature Tsld 260℃ for 5 Seconds

Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T +41 44 944 99 11, info@distrelec.com, distrelec.com

Summary of content (9 pages)

PAGE 1
White SMD LED, 1x0.5mm Features  Compatible with automatic placement equipment.  Compatible with infrared and vapor phase reflow solder process.  Mono-color type.  The product itself will remain within RoHS compliant version. Applications:  Backlighting in dashboard and switch.  Telecommunication: Indicator and backlighting in telephone and fax.  Flat backlight for LCD, switch and symbol.  General use.
PAGE 2
White SMD LED, 1x0.5mm Electrical Optical Characteristics at Ta 25℃ Parameters Symbol Min. Typ. Max. Unit (a) IV 80 150 --- mcd IF=5mA Luminous Intensity(a) IV 400 600 --- mcd IF=20mA 2θ1/2 --- 120 --- Deg IF=20mA x --- 0.30 --- y --- 0.31 --- Forward Voltage VF 2.50 2.90 3.10 V IF=5mA Forward Voltage VF 2.80 3.20 3.
PAGE 3
White SMD LED, 1x0.5mm Package Dimensions 1 2 0.5 LED Die 1 + 2 Polarity 1 LED Die 0.6 0.7 0.2 Recommended Soldering Pad Dimensions 0.45 0.2 Resin 0.2 1 2 Cathode Mark 0.6 0.5 0.6 Unit: mm Tolerance: ± 0.10mm Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25 mm (.010″) unless otherwise noted. Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T +41 44 944 99 11, info@distrelec.com, distrelec.
PAGE 4
White SMD LED, 1x0.5mm Typical Electrical / Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) Ta=25℃ Forward Current IF (mA) 100 Forward Current & Forward Voltage 75 50 25 0 300 1000 400 500 600 700 Wavelength λp (nm) Luminous Intensity & Ambient Temperature 100 10 1 -60 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta (℃) Ta=25℃ 50 40 30 20 10 0 2.6 2.8 3.0 3.2 3.4 3.6 3.
PAGE 5
White SMD LED, 1x0.5mm CIE Chromaticity Diagram: Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T +41 44 944 99 11, info@distrelec.com, distrelec.
PAGE 6
White SMD LED, 1x0.5mm Chromaticity Coordinates Specifications for Bin Rank Bin Code B1-1 B2-1 B3-1 B4-1 B1-2 B2-2 B3-2 B4-2 B1-3 B2-3 B3-3 B4-3 C1-1 C2-1 C3-1 C4-1 C1-2 C2-2 C3-2 C4-2 C1-3 C2-3 C3-3 C4-3 D1-1 D2-1 D3-1 D4-1 D1-2 D2-2 D3-2 D4-2 D1-3 D2-3 D3-3 D4-3 Left x Left y Top x Top y 0.230 0.236 0.241 0.247 0.239 0.244 0.249 0.254 0.247 0.252 0.257 0.261 0.256 0.260 0.264 0.269 0.264 0.268 0.272 0.276 0.273 0.276 0.279 0.283 0.281 0.284 0.287 0.290 0.288 0.291 0.293 0.296 0.296 0.298 0.300 0.
PAGE 7
White SMD LED, 1x0.5mm CAUTIONS 1. Handling Precautions: 1.1. Handle the component along the side surfaces by using forceps or appropriate tools. 1.2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 1.3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible.
PAGE 8
White SMD LED, 1x0.5mm 3. Soldering Condition 3.1. Pb-free solder temperature profile M a x im u m S o ld e r P ro file R e c o m m e n d e d S o ld e r P ro file M in im u m S o ld e r P ro file Temperature °C 10 S M ax R a mp D o w n 6 K /s (m a x ) 100 S M ax 120 S M ax R a mp U p 3 K /s (m a x ) S T im e 3.2. Reflow soldering should not be done more than two times. 3.3. When soldering, do not put stress on the LEDs during heating. 3.4. After soldering, do not warp the circuit board. 3.5.
PAGE 9
White SMD LED, 1x0.5mm 3.6. Because different board designs use different number and types of devices, solder pastes, reflow ovens, and circuit boards, no single temperature profile works for all possible combinations. However, you can successfully mount your packages to the PCB by following the proper guidelines and PCB-specific characterization 4. Drive Method 4.1. An LED is a current-operated device.