Datasheet

Bi-Colour SMD LED,
Red & Green
CAUTIONS
1. Handling Precautions:
1.1. Handle the component along the side surfaces by using forceps or appropriate tools.
1.2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
1.3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal
circuitry.
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly
reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products.
Failure to comply might lead to damage and premature failure of the LED.
2. Storage
2.1. Do not open moisture proof bag before the products are ready to use.
2.2. Before opening the package, the LEDs should be kept at 30°C or less and 60%RH or less.
2.3. The LEDs should be used within a year.
2.4. After opening the package, the LEDs should be kept at 30°C or less and 60%RH or less.
2.5. The LEDs should be used within 24 hours after opening the package.
2.6. If the moisture adsorbent material has fabled away or the LEDs have exceeded the storage time, baking treatment should be
performed using the following conditions. Baking treatment: 65±5°C for 24 hours.
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com