Datasheet

ManualsBrandsRND Components ManualsCapacitorsCeramic Disk Capacitor 1pF 5mm 500VDC

Features

High reliability

Excellent solderability

Ideal for industrial and commercial applications

Ceramic Disk Capacitors

[2] Temperature Characteristic

Temp.

Charact.

Temperature

Range

Capacitance

Change

NPO

-25 ~ 85℃

0±60 ppm/℃

-25 ~ 85

℃

350 ~ -1000 ppm/℃

Y5P

-25 ~ 85℃

± 10％

Z5U

+22

％

, -56％

Z5V

+10 ~ 85℃

+22％, -82％

[4] Capacitance Tolerance

Symbol

Capacitance

Tolerance

±0.25pF

±5％

±10％

±20％

+80％, -20％

[1] Type

Symbol Type

C Resin Coated

Epoxy Coated

Part Number Description (example)

RND 150 [C] [NPO] [010] [C] [2H] [05] [D] [S1] [25]

Series [1] [2] [3] [4] [5] [6] [7] [8] [9]

[3] Capacitance Value

Symbol

Capacitance

Value

060 6pF

6R8 6.8pF

120 12pF

471 470pF

222 2200pF

104 100000pF

[5] Rated Voltage

Symbol Rated Voltage

2A DC 100V

2H DC 500V

3K DC 3000V

Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T +41 44 944 99 11, info@distrelec.com, distrelec.com

Summary of content (8 pages)

PAGE 1
Ceramic Disk Capacitors Features High reliability Excellent solderability Ideal for industrial and commercial applications Part Number Description (example) RND 150 [C] [NPO] [010] [C] [2H] [05] [D] [S1] [25] Series [1] [2] [3] [4] [5] [6] [7] [8] [1] Type Symbol [4] Capacitance Tolerance Type C Resin Coated D Epoxy Coated Symbol [2] Temperature Characteristic Temp. Charact. [9] Capacitance Tolerance C ±0.
PAGE 2
Ceramic Disk Capacitors [6] External Dimensions (D) Symbol Ф (mm) 05 07 10 12 5Ф 7Ф 10 Ф 12 Ф [7] Lead Spacing (F) (mm) Symbol A D E F G Spacing 2.5 5 6.35 7.52 10 ±0.8 Tol. [8] Lead Style S1 & S2 style Symbol S2 style S1 style 0.55±0.05 d 0.45±0.05 F Lead Spacing→ Refer 1.0 L Lead Length→ Refer 1.0 D Refer to T Capacitance Range Chart G Unit:mm [9] Lead Length (L) (mm) Packing Taping(H) Bulk Symbol 04 06 10 25 16 20 Length 3.
PAGE 3
Ceramic Disk Capacitors Description Symbol Carrier Tape Width W Position of Sprocket Hole REMARK (mm) 18±0.5 W1 9±0.5 Pitch of Component P 12.7 Ref. Pitch of Sprocket hole Po 12.7±0.3 5.1±0.7 P1=3.18± 0.7 refer to F=6.35±0.8 P1 3.85±0.7 3.18±0.7 Length from Hole Center to Component Center P2 6.35 Ref. Diameter of Sprocket Hole Do 4±0.3 Diameter of Body D Diameter of Lead Wire D Lead Spacing F 5±0.8 Lead Crimped Height H Top of Component Height H1 6.35±0.8 16 20 32.25max.
PAGE 4
Ceramic Disk Capacitors 3.0 Capacitance Range Chart (Class Ⅰ ,Ⅱ) (Max. Capacitance in pF) 3.0 W.Vdc 50V 100V NPO (CH) B (Y5P) SL E (Z5U) F (Z5V) Dimensions (mm) D T G 0.5～22 15～180 100～2200 1000～5000 3300～10000 5±1 ＜3.5 ＜1.5 51～68 200～270 3300～4700 5600～10000 12000～22000 6±1 ＜3.5 ＜1.5 100～120 300～390 3900～5600 7±1 ＜3.5 ＜1.5 8±1 ＜3.5 ＜1.5 9±1 ＜3.5 ＜1.5 10±1 ＜3.5 ＜1.5 12±1 ＜3.5 ＜1.5 390～470 6800 560～680 8200～10000 (Max. Capacitance in pF) W.
PAGE 5
Ceramic Disk Capacitors 4.0 Medium-High Voltage Capacitance Range Chart (Class Ⅰ 、Ⅱ ) (Max. Capacitance in pF) W.Vdc 1KV SL B (Y5P) E (Z5U) 15~62 100～470 68～100 120～150 D T G 1000～1200 5±1 ＜3.8 ＜2.0 330～1000 1500～2200 6±1 ＜3.8 ＜2.0 1000～1500 2700～3300 7±1 ＜3.8 ＜2.0 8±1 ＜3.8 ＜2.0 4700～6800 1500～1800 3900 270～330 2000～2200 4700～5600 8200～10000 9±1 ＜3.8 ＜2.0 390 2700～3300 6800,10000 12000 10±1 ＜3.8 ＜2.0 15000 11±1 ＜3.8 ＜2.0 12±1 ＜3.8 ＜2.
PAGE 6
Ceramic Disk Capacitors 5.0 Specification No 1 2 3 Item Class I Class II Class III Measuring Condition Capacitors shall be visually inspected for visible evidence of defect. Visual and mechanical examination Dimensions shall be measured with calipers or micrometers. To be within the specifications shows in Marking shall be legibility.
PAGE 7
Ceramic Disk Capacitors 5.0 Specification No Item C Resistance to 10 Soldering heat  2.5﹪or  0.25pF Whichever is greater Class II Y5P： 5﹪ Z5U： 15﹪ Z5V： 20﹪ Class III Y5P : ± 7.5% Withstanding No defects voltage Exterior C Temperature and 11 Immersion cycling Class I Q╱D.F. I.R. No abnormalities  5﹪or  0.
PAGE 8
Ceramic Disk Capacitors 5.0 Specification No 13 Item Class I Class II Class III Measuring Condition Applied voltage： Rated voltage ×2(Class I, II) Rated voltage ×1.25(Class III) Temperature：85 2℃ Duration：100048 hrs. 0 The chargedischarge current is less than 10mA. The measurements after testing must be taken after leaving the sample for 12 to 24 hours under normal temperature and humidity conditions. C  5﹪or  0.5pF Whichever is greater Y5P： 10﹪ Z5U： 20﹪ Z5V： 30﹪ Q╱D.F.