Datasheet

Aluminium Electrolytic Capacitors
with Radial Connections
SPECIFICATION:
Capacitance tolerance
±20%
Construction Radial
Characteristics
Voltage Range
6.3 to 100 VDC 160 to 450 VDC
Capacitance Range
0.47 to 10000uF 0.47 to 470uF
Temperature Range
-40 to +85℃ -25 to +85℃
Capacitance Tolerance
20% at 120Hz , 20
℃( 10% Tol. is available upon request)
Leakage Current
I0.01CV or 3uA, whichever is greater
2 minutes after Rated Voltage applied
I0.03CV or 3uA, whichever is greater
3 minutes after Rated Voltage applied
Dissipation Factor
( tanδ)
Rated Voltag (V)e 6.3 10 6 16 2161 63 50
Dissipation Factor( tanδ)max 0.16 0.19 0.22 0.14 0.12 .10 00.100
Rated Voltag (V)e 160 100 200 250 350 450 400
Dissipation Factor( tanδ)max 0.16 0.08 0.18 0.18 0.20 0.20 0.20
For capacitance > 1000uF, add 0.02 for every 1000uF, (at 20℃, 120Hz)
Stability at Low Temperature
(For Cap.＞1000uF,
add 0.5 per 1000uF(-25℃/+20℃)
add 1.0 per 1000uF(-40℃/+20℃)
Impedance ration at 120Hz
Rated Voltag (V)e 6.3 16 10 2525 3 5050 6 100
Z-25 /Z 20℃℃ 44 3 2 2 2 2 22 2
Z-40 /Z 20℃℃ 88 6 444 333 3 3
Rated Voltag (V)e 160 200200 2 400 350 450
Z-25 /Z 20℃℃ 2 2 5 3 15 15
Load Life
After the rated voltage has
been applied for 2000 hours at
85℃
Capacitance change
Within 20% of initial value
D.F. tan
200% or less of initial specified value
Leakage current Less than Initial specified value
Shelf Life
After storage for 1000 hours at 85
℃ with no voltage applied, the capacitor shall meet the specified
limit in load life. Pre-treatment for measurement shall be conducted after application of DC working
voltage for 30 minutes.
Small size allows wider choice of capacitance and voltage for automatic insertion
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com