Datasheet

Capacitance tolerance
±20%
Aluminium Electrolytic Capacitors
with Radial/Snap-in Connections
SPECIFICATION:
Pitch
10 mm
Construcon Radial/Snap-In
Voltage Range
10 ~ 100V 160 ~ 450V
Capacitance Range
470 ~ 68000uF 47 ~ 2700uF
Temperature Range
-40 ~ +85℃ -25 ~ +85℃
Capacitance Tolerance
20% at 120Hz , 20
℃( 10% Tol. is available upon request)
Leakage Current
I = 3
√
CV (uA) max C: Capacitance, V:W.V. (After 5 minutes)
Dissipation Factor(tanδ)
( at 20
℃, 120Hz)
Less than the value under table (%)
uF \\ W.V.
10 ～ 16 25 ～ 35 50 ～ 63 80 ～ 100 160 ～ 250 350 ～ 450
47 ~ 390
- - - - 15 20
470 ~ 3900
25 20 20 20 15 20
4700 ~ 8200
35 30 30 25
10000 ~ 22000
40 35 30 30
27000 ~ 47000
45 40 35
56000 ~ 68000
50 45
Low Temperature
Characteristics (at 120Hz)
Impedance ratio at 120Hz between the -25℃ or -40 value and 20℃℃ value shall not exceed :
Rated Voltage 10 ~ 16 25 35 ~ 63 100 160 ~ 250 400 ~ 450
Z-25℃/Z 20℃ 5 4 4 4 4 8
Z-40℃/Z 20℃ 15 15 12 12 - -
Load Life
Following specifications shall meet when the capacitors are restored to 20℃ after rated working
voltage applied for 2,000 hours at max. operating temperature with the rated ripple current applied.
Capacitance change
≦
20% of the initial value.
≦
200% of the initial specified value
Dissipation factor
Leakage current
≦
The initial specified value.
Shelf Life
After storage for 1000 hours at 85℃ with no voltage applied, the capacitor shall meet the specified
limit in load life. Pre-treatment for measurement shall be conducted after application of DC working
voltage for 30 minutes.
Characteristics
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com