Metallized Polyester Film Capacitors (Dipped) Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T +41 44 944 99 11, info@distrelec.com, distrelec.
Metallized Polyester Film Capacitors (Dipped) Part Number Codes RND 150H M E F 6 3 0 S 2 2 J 0 F 2 0 0 1. 1-3 Type of Capacitor: TYPE MKP MEF MPP CODE MKP MEF MPP 2. 4-6 Rated Voltage: 063: 63VDC/JIS 1J. 100: 100VDC/JIS 2A. 250: 250VDC/JIS2E. 400: 400VDC/JIS 2G. 630: 630VDC/JIS 2J. 1K0: 1,000VDC/JIS 3A. 1K6: 1,600VDC/JIS 3C. 1N0: 10,000VDC/JIS 4A. 2A7: 275VAC 3A1:310VAC. 3. 7-9 Symbols of Capacitance in uF: A: Indicates tens. EX: 12uF=A12, 10uF=A10. W(Word): Indicates unit. EX: 1.
Metallized Polyester Film Capacitors (Dipped) Dimensions(mm) Rated Cap. 50/63/100VDC W H T P d max max max ±1.0 ±0.05 Rated Cap. 250VDC(160VAC) W H T P d max max max ±1.0 ±0.05 Rated Cap. 400VDC(200VAC) W H T P d max max max ±1.0 ±0.05 0.047uF 10.5 8.5 4.5 7.5 0.6 0.022uF 10.5 9.5 5.5 7.5 0.6 0.01uF 12.0 8.0 4.5 10.0 0.6 0.056uF 10.5 10.0 5.5 7.5 0.6 0.027uF 10.5 9.5 5.5 7.5 0.6 0.012uF 10.5 10.5 6.5 7.5 0.6 0.068uF 10.5 10.0 6.0 7.
Metallized Polyester Film Capacitors (Dipped) Construction of Component Metallized layer Polyester film 1 2 4 Item 1 2 Component Element Metal spray layer 3 Leads 4 Coating 3 Material Metallized PET film Compliant with RoHS Zn and Zn-Tin alloy wire Compliant with RoHS Tinned copper-base alloy wire Flame retardant epoxy resin(UL940V) Inks 5 RoHS Requirements Marking Compliant with RoHS Compliant with RoHS Compliant with RoHS Laser Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon
Metallized Polyester Film Capacitors (Dipped) 2. Technical Specification No. Test item Performance Withstand voltage 1 2 Ref 4.2.1 clause (T-T) Terminal case Test method (refer to IEC60384-2) Apply 150% of rated voltage / 60sec No permanent breakdown or flashover Apply 200% of rated voltage for 2 to 5 sec. CR≤0.33μf ;IR>9000MΩ Ref 4.2.4 clause CR>0.33μf Charge time 60sec Insulation resistance ; IR>3000S 3 Capacitance J±5%;K±10%;M±20% 4 Dissipation factor <= 0.01 (1.00%) at 1 KHz.
Metallized Polyester Film Capacitors (Dipped) 2. Technical Specification No. Test item Performance Test method (refer to IEC60384-2) Ref 4.4 clause 7 Resistance to solder heat There should be no visible Tb , method 1A damage, ΔC/C<±3% 260±5℃; 10±1 Solder temperature: 260±5℃ Immersion time:10±1sec Initial measurement Rapid change of temperature Capacitance, Tanδ There should be no visible damage, Ref 4.6 clause θA=-40℃, θB=+85℃ 5 cycles Duration=30min Ref 4.7 clause 8 Amplitude 0.
Metallized Polyester Film Capacitors (Dipped) 2. Technical Specification No. Test item 9 Final measurement Test method (refer to IEC60384-2 Increase of Tanδ CR≤1uf: ≤0.003 IR>50% *Rate value Initial measurement Ref 4.10 clause Dry heat +85℃, 16h Cold -40℃,2h Damp heat, cyclic Test Db, remaining cycles There should be no visible damage, 10 Final measurement 11 Performance Damp heat steady state legible marking. Capacitance change: ΔC/C<±5% Increase of Tanδ: CR≤1uf: ≤0.
Metallized Polyester Film Capacitors (Dipped) 2. Technical Specification No. Test item Performance Test method (refer to IEC60384-2 ) There should be no visible damage, legible marking. 12 Endurance Capacitance change ΔC/C≤5% Increase of Tanδ: CR≤1uf: ≤0.003 Ref 4.12 clause (1.25*UR)at 105℃,1000h IR>50% *Rate value Ref 4.13 clause There should be no visible damage, legible 13 Charge and discharge marking. Capacitance change ΔC/C≤5% Increase of Tanδ: CR≤1uf: ≤0.
Metallized Polyester Film Capacitors (Dipped) Characteristic Curve Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T +41 44 944 99 11, info@distrelec.com, distrelec.
Metallized Polyester Film Capacitors (Dipped) Characteristics Reference Soldering Temperature VS Time o C 270 260 250 240 230 220 o C 270 260 250 240 230 220 PE GOOD 中达电子 PP GOOD 0 1 2 3 4 5 6 7 8 9 10 Sec. 0 1 2 3 4 5 6 7 8 9 10 Sec. Frequency Characteristics DF(%) ΔC/C(%) +1 0 -1 -2 -3 -4 -5 -6 -7 10 PP PE 1.0 PP 0.1 PE 101 102 103 104 105 Hz 0.