Metallized Polypropylene Film Interference Suppression Capacitors 250/275/305/310VAC,50/60Hz Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T +41 44 944 99 11, info@distrelec.com, distrelec.
Metallized Polypropylene Film Interference Suppression Capacitors Part Number Codes RND 150H M K P 3 A 1 P 1 0 K 0 I 2 0 0 1. 1-3 Type of Capacitor: TYPE MKP MEF MPP CODE MKP MEF MPP 2. 4-6 Rated Voltage: 063: 63VDC/JIS 1J. 100: 100VDC/JIS 2A. 250: 250VDC/JIS2E. 400: 400VDC/JIS 2G. 630: 630VDC/JIS 2J. 1K0: 1,000VDC/JIS 3A. 1K6: 1,600VDC/JIS 3C. 1N0: 10,000VDC/JIS 4A. 2A7: 275VAC 3A1:310VAC. 3. 7-9 Symbols of Capacitance in uF: A: Indicates tens. EX: 12uF=A12, 10uF=A10. W(Word): Indicates unit.
Metallized Polypropylene Film Interference Suppression Capacitors Dimensions(mm) Rated Cap.uF 310VAC W H T P d Rated Cap.uF 310VAC W H T P d Rated Cap.uF 310VAC W H T P d max max max ±1.0 ±0.05 max max max ±1.0 ±0.05 max max max ±1.0 ±0.05 0.001 10 9 4 7.5 0.6 0.01 18 11 5 15 0.6/0.8 0.47 31 18 9 27.5 0.8 0.018 10.5 9 4 7.5 0.6 0.012 18 11 5 15 0.6/0.8 0.68 31 19 11 27.5 0.8 0.0022 10 9 4 7.5 0.6 0.015 18 11 5 15 0.6/0.8 0.
Metallized Polypropylene Film Interference Suppression Capacitors Construction of Component Metallized layer Polypropylene film Material RoHS Requirements Item Component 1 Element Metallized OPP film Compliant with RoHS 2 Metal spray layer Zn and Zn-Tin alloy wire Compliant with RoHS 3 Leads 4 Potting compound 5 Enclosure 5.
Metallized Polypropylene Film Interference Suppression Capacitors 2. Technical Specification No. 1 Test item 3 Test method (refer to IEC60384-14) Withstand voltage Ref 4.2.1 clause (T-T) 1183VDC / 60sec Terminal case 2 Performance No permanent breakdown or flashover CR≤0.33μf ;IR>15000MΩ Ref 4.2.5 clause CR>0.33μf Charge time 60sec Insulation resistance Capacitance 2050VAC, 50/60HZ , 60sec ; IR>5000S J±5%;K±10%;M±20% Charge voltage 100VDC Ref 4.2.2 clause 1V, 1KHZ (25℃±5℃) 0.
Metallized Polypropylene Film Interference Suppression Capacitors 2. Technical Specification No. Test item Performance Resistance to solder heat There should be no visible Test method (refer to IEC60384-14 ) Ref 4.4 clause 7 damage, ΔC/C<±5% Tb , method 1A Solder temperature 260±5℃ Immersion time:10±1sec 8 Solvent resistance of The marking should be the marking legible. Initial measurement Ref 4.
Metallized Polypropylene Film Interference Suppression Capacitors 2. Technical Specification No. Test item Performance 9 Final measurement There should be no visible damage, ΔC/ Test method (refer to IEC60384-14 ) C<±5% Ref 4.11clause Initial measurement Dry heat +110℃, 16h Cold -40℃,2h Damp heat, cyclic Test Db, remaining cycles There should be no visible damage, 10 legible marking. Capacitance change ΔC/C<±5% Increase of Tanδ Final measurement CR≤1uf: ≤0.008 (10khz) CR>1uf: ≤0.
Metallized Polypropylene Film Interference Suppression Capacitors 2. Technical Specification No. Test item Performance Test method (refer to IEC60384-14 ) CR≤1uf: ≤0.008 (10khz) CR>1uf: ≤0.005 (1khz) 11 Damp heat steady state Dielectric strength: there shall be no permanent breakdown or flashover. IR>50% *Rate value Ref 4.13 clause CR≤1uf: Up=2.
Metallized Polypropylene Film Interference Suppression Capacitors 2. Technical Specification No. Test item Performance Test method (refer to IEC60384-14 ) There should be no visible damage, legible marking. Capacitance change ΔC/C≤10% Increase of Tanδ: 13 Endurance CR≤1uf: ≤0.008 (10khz) CR>1uf: ≤0.005 (1khz) Dielectric strength: there shall be no Ref 4.14 clause Applied voltage 334vac (1.25*UR)at 105℃,1000h. (The voltage should be subjected to 1000rms for 0.1s every one hour during test.
Metallized Polypropylene Film Interference Suppression Capacitors 2. Technical Specification No. Test item Performance Test method (refer to IEC60384-14 ) no more than 1A,(whichever the 14 Charge and Discharge resistance value is the greater) DV/ DT(V/us): 100v/us max Ref 4.17 clause Needle flame test 15 Passive flammability The flaming time of each sampling The category of flammability :C capacitor shall not go beyond 30sec after it Expose time:1time is taken apart from the flame.
Metallized Polypropylene Film Interference Suppression Capacitors Characteristic Curve Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T +41 44 944 99 11, info@distrelec.com, distrelec.
Metallized Polypropylene Film Interference Suppression Capacitors Characteristics Reference Soldering Temperature VS Time o C 270 260 250 240 230 220 o C 270 260 250 240 230 220 PE GOOD 中达电子 0 1 2 3 4 5 6 7 8 9 10 Sec. PP GOOD 0 1 2 3 4 5 6 7 8 9 10 Sec. Frequency Characteristics DF(%) ΔC/C(%) +1 0 -1 -2 -3 -4 -5 -6 -7 10 PP PE 1.0 PP PE 101 102 103 104 105 Hz 0.1 0.01 101 102 103 104 105 Hz Temperature Characteristics ΔC/C(%) at 1KHz DF(%) at 1KHz +10 1.2 PE +5 1.0 0.