Datasheet

ManualsBrandsRND Components ManualsCapacitorsX2 Capacitor, 100nF, 330VAC, 10%

SPECIFICATION:

±10%

Temperature range -40...+110 °C

Dielectric Metallized polypropylene lm

IEC-climate category 40/110/56/B

X2 Capacitors

Metallized Polypropylene Film (X2) AC Capacitors

(Interference Suppressors Class-X2)

PRODUCT DIMENSIONS:

20mm

5.5mm min.

min

5 mm or customized

Shape: L

Shape: S

Shape: K

1. STANDART ATMOSPHERIC CONDITIONS:

Ambient Temperature

15 °C to 35 °C (If there is any doubt on the results, the measurements

shall be made at +20 ± 5 °C)

Relative Humidity (R.H)

45% to 75%

(If there is any doubt on the results, the measurements shall

be made at 60% to 70%)

Air Pressure

86 kpa t

o 106 kpa

Operating Temperature range

-40 °C

o +110 °C for which the capacitor can be operated continuously at

rated voltage

2. CONSTRUCTION

Dielectric

Metal Spra

Lead Wire

Epoxy Resin

Pla

stic Case

Special Solder

Copper-clad Steel Wire

UL 94V-0

Met

allized Polypropylene Film

Capacitance tolerance

Rated Voltage

300 or 330 VAC

Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T +41 44 944 99 11, info@distrelec.com, distrelec.com

Summary of content (6 pages)

PAGE 1
X2 Capacitors Metallized Polypropylene Film (X2) AC Capacitors (Interference Suppressors Class-X2) SPECIFICATION: 300 or 330 VAC ±10% -40...+110 °C Metallized polypropylene film 40/110/56/B Rated Voltage Capacitance tolerance Temperature range Dielectric IEC-climate category PRODUCT DIMENSIONS: W W T T H H 20mm P d d min. Shape: L 5.5mm min. L P Shape: K 5 mm or customized Shape: S 1.
PAGE 2
3. ELECTRICAL CHARACTERISTICS ĞƚǁĞĞŶ dĞƌŵŝŶĂůƐ ^ŚĂůů ďĞ ŶŽ ĂďŶŽƌŵĂůŝƚǇ 3.
PAGE 3
5. ENDURANCE CHARACTERISTICS Appearance Withstand Voltage 5.1 Temperature Cycle Capacitance Change Rate Dissipation Factor 5.2 Dry Heat Resistance Within ±5% of the value before test @ 1KHz: 0.002 (0.2%) max. ≥50% of the limit value of NO.3.4 Appearance Shall be no remarkable change Withstand Voltage Dissipation Factor Insulation Resistance Appearance Withstand Voltage Capacitance Change Rate Dissipation Factor Insulation Resistance 5.4 Damp Heat Shall satisfy NO.3.
PAGE 4
5.5 Vibration Resistance Appearance Connection strength Appearance 5.6 Soldering Heat Resistance Withstand Voltage Between Terminals Capacitance Change Rate Dissipation Factor Shall satisfy NO.3.1 Within ±3% of the value before test @ 1KHz: 0.002 (0.2%) max. Connection of Element Shall be stable Preheat Temp. : 100~120 °C Preheat Duration : 60 sec. max. Temperature Increase by 3 °C/sec. max. Soldering Temperature : +260 ± 5 °C Immersion Duration : 5 ± 1sec. Immersion Depth : 4 ± 0.8mm from roots.
PAGE 5
. PRODUCT CODING RND 150 J H 104 K 330 T 150 □□□ Internal Code Dimension of Pitch in mm 100:10mm, 150:15mm, 225:22.5mm, 275:27.5mm Lead Shape: L, K, S(Bulk), T(Taped) Rated Voltage: VAC Capacitance Tolerance Code J：± 5﹪, K：±10﹪, M：±20﹪ Nominal Capacitance Describe in pF, the first two digitals are significant figures, the third is the number of zeros to follow.
PAGE 6
PRODUCT RANGE: Art. Nr. Capacitance Rated voltage Pitch Width Height ød RND 150J123K330L150D1 RND 150J153K330L075B3LT RND 150J153K330L100C2-3 RND 150J153K330L150D1 RND 150J183K330L075B3LT RND 150J183K330L100C2-3 RND 150J183K330L150D1 RND 150J223K330L075B3LT RND 150J223K330L100C2-3 RND 150J223K330L150D1 RND 150J273K330L075B3LT RND 150J273K330L100C2-3 RND 150J273K330L150D1 RND 150J333K330L075B3LT RND 150J333K330L100C2-3 RND 150J333K330L150D1 RND 150J473K330L100C2-3 0.012 µF 0.015 µF 0.015 µF 0.