Datasheet

Aluminium Electrolytic
Capacitors
Electrical Characteristics
NO. ITEM
2.1
2.2
Capacitance
2.3
1. Measuring frequency : 120 ± 12Hz
2. Measuring voltage : ≦0.5Vrms + 0.5 ~ 2.0VDC
Voltage range﹑capacitance
range, see specification of this
series.
Dissipation factor
〔 〕
3. Measurement circuit
2.4
Leakage current DC leakage current shall be measured after 1~2 minutes
application of the
DC rated working voltage through the
1000 Ω resistor at 20℃.
Dissipation factor﹑leakage
current, see specification of
this series.
S R
CX
S1 : Swich
S2 : Swich for protect of
current meter
R : 1000 ± 100Ω A :
DC current
meter
V : DC voltage meter
CX : Testing capacitor
2.5
Temperature
characteristics STEP
STORAGE TIME
1
30 minutes
2
2 hours
3
15 minutes
4
2 hours
Step 1. Measure the capacitance and
impedance.(Z
r0
) .
( │Z∣, 20℃ ,
120Hz ± 10% )
Step 2. Measure the impedance at thermal balance after
2 hours.
(Zr) .( │Z∣, -40℃, 120Hz ± 10% )
Step 4. Measure the capacitance and leakage current at
Step 2.
Impedance ratio (Zr / Z
r0
)
less than specified value.
Step 4
Capacitance change :
within ± 20% of the initial
measured value.
Leakage current :
Less than 10 times of initial
specified
value .
thermal balance after 2 hours.
20 ± 2 ℃
105 ± 2℃
TEST METHOD
SPECIFICATION
TEMPERATURE
20 ± 2 ℃
-40 ± 3 ℃
V
A
S 2
+
-
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com