Datasheet

TVS Diodes
TRANSIENT VOLTAGE SUPPRESSOR
Breakdown Voltage: 6.8 to 440 V
Peak Pulse Power: 600 W
Features
• Plastic package has UL Flammability Classification 94V-0
• 600 W peak pulse power capability on 10/1000µs waveform,
repetition rate (duty cycle): 0.01%
• Excellent clamping capability
• Low incremental surge resistance
• Very fast response time
• Halogen and Antimony Free(HAF), RoHS compliant
Mechanical Data
• Case: Molded plastic, DO-15
• Lead: Axial leads, solderable per MIL-STD-202, Method 208
guaranteed
• Polarity: Color band denotes cathode except bipolar
• Mounting Position: Any
Description
• Devices for bidirectional applications
• Electrical characteristics apply in both directions
Absolute Maximum Ratings
Rating at 25
O
C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load; for
capacitive load, derate current by 20%.
Parameter Symbol Value Unit
Peak Power Dissipation with a 10/1000µs Waveform
1)
P
PPM
Min. 600 W
Steady State Power Dissipation at T
L
= 75
O
C, Lead Lengths 0.375"(9.5mm)
2)
P
tot
5 W
Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated
Load (JEDED Method) Unidirectional Only
3)
I
FSM
100 A
Maximum Instantaneous Forward Voltage at 50 A for Unidirectional Only
4)
V
F
3.5/5 V
Junction Temperature T
j
150
O
C
Storage Temperature Range T
Stg
- 55 to + 150
O
C
1) Non-repetitive current pulse, per Fig. 3 and derated above T
A
= 25
O
C, per Fig. 2
2) Mounted on Copper pad area of 1.6 X 16" (40 X 40 mm) per Fig. 5
3) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
4) V
F
= 3.5 V max. for P6KE200(A) & below; V
F
= 5 V max. for P6KE220(A) & above
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com