Datasheet

LAN CABLE TESTER
RND 750-00002
INTRODUCTION:
The Remote Cable Tester is a palm-sized unit with four dierent testing ports:
RJ-11, RJ-45, USB and BNC, for the testing of today’s most popular media. This
unit can be used to verify the condition of cable, both before and aer their
installation. The passive module can be separated for testing the remote end of
installed network cabling.
One buon testing oers easy operation and multiple LEDs give clear testing
results. The unit will also automatically shut o when not in use.
SPECIFICATIONS:
•Detachable module for testing two remote points.
•Open/Short wiring test.
•Connected wires display.
•No connection/No terminator indication.
•Wrong connection/Non-parallel connection display.
•BNC terminator 25 / 50 indication.
•Battery good or battery low indication.
•Ethernet 10BASE-2 terminator value detection.
•Easily visible LED display provides operation status.
•One step operation.
•Fast reaction during test process.
•Palm size with carrying bag.
•Maximum cable length 600 feet (RJ-45/RJ-11/BNC).
•9V battery required.
•Emissions safety: FCC Class B; CE Class B.
•Dimensions: 143 x 85 x 25mm (5 5/8” x 3 3/8” x 1”).
•Net weight: 175g (0.38lbs).
DO NOT USE ON LIVE CIRCUITS!
-1-