Datasheet

ManualsBrandsRND Connect ManualsCable & WireHeat-Shrink Tubing 2:1, 3 ... 6.5mm, Black, 1.2m

Halogen Free Flame-Retardant

Heat Shrinkable Tube

RND is a trademark of Distrelec

Content and Application

This specification defines technical requirement, testing method, testing

rules and packing of halogen free flame-retardant heat shrinkable tube

This specification applies to wire connection, disposal of wire

termination, sign of the wire bind, insulate protection of resistance and

capacitance, surface protection of sport equipment and the steel frame,

rust-proof and corrosion-proof of relative products, wire protection and

other application of halogen free flame-retardant heat shrinkable tube

Standard

Standard for Extruded Electrical Tubing UL 224

Terms

Heat shrinkable material

The heat-shrinkable materials are obtained by cross-linking of polyethylene with chemical or radiation method. The shape of a

product is formed at high temperatures and then solidified by cooling it to a room temperature. Owing its “shape memory”, it will

attempt to return to its original shape, thus significantly decreasing its cross dimensions and tightly closing the object placed previous

into it. This ensures electrical insulation, anticorrosion protection, improve aesthetics

Heat shrinkable tubes

The polymer or polymer alloy through extrusion molding are defined size tubular intermediate product, irradiation (or chemical)

heating expansion after cross linking, cooling and shaping with certain size tubular products have become heat shrinkable sleeve

Technical Requirement

Conditions

• The use of the environment temperatures: -55 ... 125℃

• Can be used in acid, alkali conditions

• Use with strict requirement about environment

Appearance requirement

• EŽŽďǀŝŽƵƐƐĐƵĨĨŝŶŐƐĂŐƐĂŶĚĐƌĞƐƚƐďĂŵďŽŽͲƐŚĂƉĞĚĨůĂǁŽŶƉƌŽĚƵĐƚƐ

• dŚĞƐƵƌĨĂĐĞƐŽŶƚŚĞƉƌŽĚƵĐƚƐĂƌĞƉŽůŝƐŚĞĚĂŶĚƐƉŽƚůĞƐƐǁŝƚŚŽƵƚŽŝůƐƚĂŝŶǁŝƚŚŽƵƚůĂǇŝŶŐĚƵƐƚ

• Printing clear

Heat shrinking property

• Minimum shrink temperature: 70℃

• Minimum full recovery temperature for thin wall: 110℃

• Minimum full recovery temperature for normal wall: 125℃

• Longitudinal shrinking ratio less than ±5%

Material performance

Material physical and chemical performance confirm to table 1

Products’ dimension

Normal wall Halogen Free Flame-Retardant Heat shrinkable Tube dimension confirm to table 3

Colour

Black

Summary of content (4 pages)

PAGE 1
Halogen Free Flame-Retardant Heat Shrinkable Tube Content and Application This specification defines technical requirement, testing method, testing rules and packing of halogen free flame-retardant heat shrinkable tube This specification applies to wire connection, disposal of wire termination, sign of the wire bind, insulate protection of resistance and capacitance, surface protection of sport equipment and the steel frame, rust-proof and corrosion-proof of relative products, wire protection and other appl
PAGE 2
Halogen Free Flame-Retardant Heat Shrinkable Tube Storage requirements and storage period • Avoid direct sunlight, rain and trampling • Temperature: -10 ... 45℃ • Humidity: annual mean ≤75%, less than 30 days ＞75%，≤ 95% one year • Max storage period: 36 months from the date of production The method of usage In the use process, in order to ensure the heat shrinkable sleeve can complete contraction in place, the use of forced air oven thermostat, and the shrinkage temperature control in 125℃.
PAGE 3
Halogen Free Flame-Retardant Heat Shrinkable Tube TABLE 2 Normal wall Halogen Free Flame-Retardant Heat shrinkable Tube Dimensional Requirement Art Nr. Spec. As supplied(mm) After shrinkage(mm) Application range(mm) （mm） Inner Diameter Wall Thickness Inner Diameter Wall Thickness RND 465-00973 Φ3.0 3.50±0.2 0.20±0.05 ≤1.50 0.45±0.10 1.60～2.70 RND 465-00974 Φ4.5 5.00±0.2 0.28±0.05 ≤2.30 0.56±0.10 2.35～4.00 RND 465-00975 Φ6.0 6.50±0.2 0.28±0.05 ≤3.00 0.56±0.10 3.10～5.
PAGE 4
Halogen Free Flame-Retardant Heat Shrinkable Tube Material Composition Halogen Free Flame-Retardant Heat shrinkable Tube of RND is a flame retardant tubes made from Polyolefin and Flame-Retardant Material etc. The contents of Pb,Cd,Hg,Cr6+,PBBS,PBDES are all confirmed to requirements of (EU) 2015/863 (RoHS2.0) standards. The contents of Cl and Br confirmed to SONY-SS-00259 standards.