User Manual

10 11
RND 320-KEL SeriesRND 320-KEL Series
4. The Storage Function of Steady State and Recalling
Note: The load can save and recall 100 sets of stationary seing values.
And to set the values, the number keys, knob and up & down buons all
can be used.
4.1 Storage function
Operation Method: Taking 10.000V stored to 99 as example.
4.2 Recall Function
Operation method: taking recalling the stored steady-state value in 99
As example.
5. Ml-MS Fast Recall and Storage Function
5.1 Ml-MS Fast Recall Function
Note: By pressing Ml-MS, the steady state content stored in Ml-MS
can be quickly recalled.
5.2 Ml-MS Fast Storage Function
Note: You can change the content of Ml-MS by selecting Ml-MS
buon; and then press the currently selected Ml-MS buon to fast
save the value to the currently selected M key.
For example, the previous content of Ml is CV+15.001V and now
needing to modify as CV+14.000V, you can press Ml to recall the
content and then modify to 14.000V through rotating the knob and
then pressing the number keys to select the value you want. Aer
that, press Ml again to save it in Ml.
6. Short Circuit Function
Note: the load will make the tested equipment output the max current.
Operation Method:
7. Dynamic Test Function
Note: There are 6 seing functions in this mode: Dynamic CV, Dynamic CC,
Dynamic CR, Dynamic CW, Dynamic Pulse and Dynamic Flip. And this mode
has no storage function, so it can be only set rst and then run.
7.1 Dynamic CV, Dynamic CR, & Dynamic CW
Description: used for the dierent duty cycle output of 2 dierent volt
ages at a certain frequency.
Operation Method:
Taking the rst voltage lV, the second voltage 2V , the cycle frequency
lHZ and the duty cycle 40% as example; as for Dynamic CR and
Dynamic CW, just need to change the seing voltage into resistance or
power. And Dynamic CR selects mode 3 while Dynamic CW
selects mode 4.