User Manual

16 17
RND 320-KEL SeriesRND 320-KEL Series
7.4 Dynamic Toggle
Note: Every time when receiving a trigger signal, the load will toggle
between the rst and second seing current.
Operation method: taking it as example that the change slope of the
rst current is 0.00lA/Us, that of the second current is 0.002A/Us, the
rst current is lA, and the second current is 2A.
Remarks: press ON/OFF to start and then the LED display on the right
boom is the count of triggers.
8. Sequential Operation Function
8.1SequentialSeingFunction
Note: It can save 7 groups at most and every set it can at most set
84 dynamic currents. And the set current can be toggled in
sequence. Operation description: taking it as example that the
seingissavedingroup1,themaxcurrentis4A,thereare3
dynamiccurrents,therstdynamiccurrentislA,thechangerate
is0.00lA/us,thetimeisls,theseconddynamiccurrentis2A,the
changerateis0.002A/us,thetimeis2s,therstdynamiccurrentis
3A,thechangerateis0.003A/us,thetimeis3Sandtherepetition
times is 5 times.