Datasheet

4 mm Banana (female) Jack (socket)
RND is a trademark of Distrelec
Features
Solder wire attachment
M6 threaded stud and hex nuts
Specification
Electrical protection
30 V AC/ 60V DC, 6 A
Operating Temperature
-20 ... 60 °C
Conformity
European Directive "RoHS" 2011/65/EU
European REACH regulation n°1907 / 2006.
Environment
"RoHS" compliant, Pb ≤ 4 % in conductor, Pb ≤ 0.1 % in insulator, Hg ≤ 0.1 %,
Cr VI ≤ 0.1 %, Cd ≤ 0.01 %, PBB ≤ 0.1 %, and PBDE ≤ 0.1 %.
"REACH" compliant, no substances from the candidate list of SVHC for
authorisation at mass concentrations greater than 0.1 %.
Conductor Material Brass
Gather a stranded or solid wire
with the specifications below
and a tool to strip the wire.
Strip the end of the wire on
10 mm at least. Unscrew the
button. Insert the wire into the
radial Ø2 mm hole. Screw and
tighten the button.
10 mm mini..
1.50 mm² maxi.
(approx. AWG16).
The 4 mm banana
female connection
complies with the non-
shrouded 4 mm
banana plugs of the
worldwide most
famous manufacturers.
The terminal complies with
usual 4 mm² - 6 mm² ring lug
tightened between the two
nuts. It offers solder wire
attachment too with lead-tin
or lead-free tin and 150 W
maximum soldering iron.
4
Ø11
Ø10.2
Ø8
Ø3.5
Ø2 Ø3.5
The screwing
button
tightens the
wire inserted
into the radial
Ø2 mm hole.
The front insulator and the
rear insulating spacer
make the socket
compliant with conductive
panels because they
insulate the panel against
the metal parts of the
socket.
M6 x 0.75
17 mm when the
button is fully
unscrewed.
4
14.5
Ø10.2
2.5 2.0
1.0
14 mm when the
button is fully screwed.
2
8
6.4
Ø2 mm hole.