Datasheet

4 mm Banana (male) Plug to M3 Threaded

Stud Adapter w/ 2 Hex Nuts

RND is a trademark of Distrelec

RND Part Nr.

RND 350-00049

Specification

Electrical protection

30 V AC/ 60V DC, 36 A @ 40 °C

Operating Temperature

-20 ... 130 °C

Conformity

European Directive “RoHS” 2011/65/EU. European Directive 2015/863/EU

European regulation n°1907 / 2006 “REACH"

European regulation 2017 / 821 “Conflict minerals"

Environment

"RoHS" compliant, Pb ≤ 4 % in conductor, Pb ≤ 0.1 % in insulator, Hg ≤ 0.1 %,

Cr VI ≤ 0.1 %, Cd ≤ 0.01 %, PBB ≤ 0.1 %, and PBDE ≤ 0.1 %.

"REACH" compliant, no substances from the candidate list of SVHC for

authorisation at mass concentrations greater than 0.1 %.

Conductor Material Brass

The design and the material of

the lantern contact spring meet the

need of low resistance and reliability.

10.6 3

0.8 19

M3 x 0.5

2.3 2.3

6 5.5

M3 n

ut.

M3 nu

How to Implement

The M3 x 0.5 thread complies with Ø3.0 mm -0 mm +0.1 mm holes.

With a spanner SW6 mm I screw and tighten

the M3 nuts on the M3x0.5 thread to

hold ring lug for example. (2.3 N.m

maxi. torque.)

(With a spanner SW6 mm I can screw and

tighten the adapter into a M3 threaded

hole also. 2.3 N.m maxi. torque.)

Ø3.0 mm

-0 mm

+0.1 mm

PAGE 1
4 mm Banana (male) Plug to M3 Threaded Stud Adapter w/ 2 Hex Nuts Specification 30 V AC/ 60V DC, 36 A @ 40 °C Electrical protection Operating Temperature Conductor Material -20 ... 130 °C Brass Conformity European Directive “RoHS” 2011/65/EU. European Directive 2015/863/EU European regulation n°1907 / 2006 “REACH" European regulation 2017 / 821 “Conflict minerals" Environment "RoHS" compliant, Pb ≤ 4 % in conductor, Pb ≤ 0.1 % in insulator, Hg ≤ 0.1 %, Cr VI ≤ 0.1 %, Cd ≤ 0.01 %, PBB ≤ 0.