Datasheet

• Low carbon austenitic steel (Material number 1.4435, DIN X2CrNiMo18-14-3,
AISI number 316L)
• Contains from 16.5 to 18.5 wt% chromium and has important quantities of
nickel and molybdenum as additional alloying elements
• Non-magnetizable (80%)
• Good corrosion resistance to most chemicals, salts and acids
• Generally used where corrosion resistance and toughness are primary
requirements
• Typical applications include tweezers for the electronic industry, watch-makers,
jewelers and laboratory and medical applications in moderately aggressive
chemical environments
Kit of 3 ESD Epoxy Coated
Tweezers
Specification
Component Wt.% Component Wt.% Component Wt.%
C
≤0
.03
Si
≤1.0
Mn
≤2.0
P
≤0.045
S
≤0.03
Cr
17.0-19.0
Mo
2.5-3.0
Ni
12.5-15.0
Composition
16.0 E-6/°C
20°C-100°C
17.0 E-6/°C
20°C-300°C
0.50 J/(g
.
K)
15 W/(m.K)
350°C
925°C
8.0 g/cm
3
≤ 215
79
500-700 MPa
290
≥ 200 MPa
40%
200 GPa
0.75 E-4 Ohm.cm
State
Density
Hardness HB30
Hardness Rockwell B
Tensile strength, ultimate
Tensile strength, yield
0.2% Yield stress
Elongation, break
Modulus of elasticity
Mechanical Properties
annealed
Coef. of lin. therm expansion
Coef. of lin. therm expansion
Specific heat capacity
Thermal conductivity
Continuos use temperature
Max service temperature, air
Thermal Properties
Electrical Properties
Resistivity
Art. Nr.
RND
550-00333
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com