Datasheet

ManualsBrandsRND Lab ManualsDesolderingDesoldering Braid 1.5m 1.4mm Yellow

Desoldering Flux Coated Braid

RND is a trademark of Distrelec

MATERIAL SAFETY DATA SHEET

Date of issue: 5/11/2017

SECTION 1: Identification of the substance/mixture and of the company/undertaking

Product name

Product code

Product description

Product type

1.1 Product identifier

: No-Clean Desoldering Flux coated braid

: RND 560-00195, RND 560-00196, RND 560-00197

: Solder Remover -- Fine braided copper wire with synthetic flux

: Solid.

1.3 Details of the supplier of the safety data sheet

1.2 Relevant identified uses of the substance or mixture and uses advised against

Distrelec Group AG

c/o TeCo CDC BV

De Tweeling 28

NL-5215 MC's- Hertogenbosch The

Netherlands

www.distrelec.com

+41 44 944 99 11

+41 44 944 99 88

Not applicable.

1.4 Emergency telephone number

+41 44 944 99 11

+41 44 944 99 88

EMERGENCY HEALTH INFORMATION: EMERGENCY SPILL

INFORMATION:

Transport information

Telephone numbers

Information limitations

Supplier

See Section 16 for the full text of the H statements declared above.

See Section 11 for more detailed information on health effects and symptoms.

100 percent of the mixture consists of component(s) of unknown toxicity

Contains 30 % of components with unknown hazards to the aquatic environment

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

Product definition : Mixture

:Ingredients of unknown

toxicity

Ingredients of unknown

ecotoxicity

Classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]

Aquatic Acute 1, H400

Aquatic Chronic 1, H410

The product is classified as hazardous according to Regulation (EC) 1272/2008 as amended.

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830

Summary of content (13 pages)

PAGE 1
Desoldering Flux Coated Braid MATERIAL SAFETY DATA SHEET Date of issue: 5/11/2017 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier Product name Product code Product description Product type : No-Clean Desoldering Flux coated braid : RND 560-00195, RND 560-00196, RND 560-00197 : Solder Remover -- Fine braided copper wire with synthetic flux : Solid. 1.2 Relevant identified uses of the substance or mixture and uses advised against Not applicable. 1.
PAGE 2
Desoldering Flux Coated Braid MATERIAL SAFETY DATA SHEET Date of issue: 5/11/2017 2.2 Label elements Hazard pictograms : Signal word : Warning Hazard statements : Very toxic to aquatic life with long lasting effects. Precautionary statements Prevention Response Storage Disposal Supplemental label elements Annex XVII - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles : Avoid release to the environment. : Collect spillage.
PAGE 3
Desoldering Flux Coated Braid MATERIAL SAFETY DATA SHEET Date of issue: 5/11/2017 TYPE [1] Substance classified with a health or environmental hazard [2] Substance with a workplace exposure limit [3] Substance meets the criteria for PBT according to Regulation (EC) No. 1907/2006, Annex XIII [4] Substance meets the criteria for vPvB according to Regulation (EC) No. 1907/2006, Annex XIII [5] Substance of equivalent concern Occupational exposure limits, if available, are listed in Section 8.
PAGE 4
Desoldering Flux Coated Braid MATERIAL SAFETY DATA SHEET SECTION 5: Firefighting measures Date of issue: 5/11/2017 5.1 Extinguishing media Suitable extinguishing media : Use an extinguishing agent suitable for the surrounding fire. Unsuitable extinguishing media : None known. 5.2 Special hazards arising from the substance or mixture Hazards from the substance or mixture : This material is very toxic to aquatic life with long lasting effects.
PAGE 5
Desoldering Flux Coated Braid MATERIAL SAFETY DATA SHEET Date of issue: 5/11/2017 SECTION 7: Handling and storage The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be consulted for any available use-specific information provided in the Exposure Scenario(s). 7.1 Precautions for safe handling Protective measures : Advice on general occupational hygiene Put on appropriate personal protective equipment (see Section 8). Do not ingest.
PAGE 6
Desoldering Flux Coated Braid MATERIAL SAFETY DATA SHEET DNELs/DMELs Date of issue: 5/11/2017 No DNELs/DMELs available. PNECs No PNECs available 8.2 Exposure controls : Good general ventilation should be sufficient to control worker exposure to airborne contaminants.
PAGE 7
Desoldering Flux Coated Braid MATERIAL SAFETY DATA SHEET Date of issue: 5/11/2017 SECTION 9: Physical and chemical properties 9.1 Information on basic physical and chemical properties Appearance Physical state Colour Odour Odour threshold pH Melting point/freezing point Initial boiling point and boiling range Flash point Evaporation rate Flammability (solid, gas) Upper/lower flammability or explosive limits : Solid. [Metal.
PAGE 8
Desoldering Flux Coated Braid MATERIAL SAFETY DATA SHEET Date of issue: 5/11/2017 SECTION 11: Toxicological information 11.1 Information on toxicological effects Acute toxicity Product/ingredient name pentaerythritol tetrabenzoate Conclusion/Summary Result LD50 Oral Species Rat Dose 1158 mg/kg Exposure - : Not available. Acute toxicity estimates Route ATE value Oral 2316 mg/kg Irritation/Corrosion Conclusion/Summary : Not available. Sensitisation Conclusion/Summary : Not available.
PAGE 9
Desoldering Flux Coated Braid MATERIAL SAFETY DATA SHEET Date of issue: 5/11/2017 Delayed and immediate effects as well as chronic effects from short and long-term exposure Short term exposure Potential immediate effects Potential delayed effects : Caution: exposure to this material may cause certain sensitive individuals to develop eczema and/or asthma. May cause sensitisation by inhalation and skin contact.
PAGE 10
Desoldering Flux Coated Braid MATERIAL SAFETY DATA SHEET Date of issue: 5/11/2017 12.2 Persistence and degradability : Not available. Conclusion/Summary 12.3 Bioaccumulative potential Not available. 12.4 Mobility in soil Soil/water partition coefficient (KOC) : Not available. Mobility : Not available. 12.5 Results of PBT and vPvB assessment PBT : Not applicable. vPvB : Not applicable. 12.6 Other adverse effects : No known significant effects or critical hazards.
PAGE 11
Desoldering Flux Coated Braid MATERIAL SAFETY DATA SHEET SECTION 14: Transport information ADR/RID ADN IMDG IATA 14.1 UN number Not regulated. Not regulated. Not regulated. Not regulated. 14.2 UN proper shipping name - - - - 14.3 Transport hazard class(es) - - - - 14.4 Packing group - - - - 14.5 Environmental hazards No. No. No. No. Additional information - - - - 14.
PAGE 12
Desoldering Flux Coated Braid MATERIAL SAFETY DATA SHEET Prior Informed Consent (PIC) (649/2012/EU) Not listed. Seveso Directive This product is controlled under the Seveso Directive. Danger criteria Category E1: Hazardous to the aquatic environment - Acute 1 or Chronic 1 International regulations Chemical Weapon Convention List Schedules I, II & III Chemicals Not listed. Montreal Protocol (Annexes A, B, C, E) Not listed. Stockholm Convention on Persistent Organic Pollutants Not listed.
PAGE 13
Desoldering Flux Coated Braid MATERIAL SAFETY DATA SHEET Procedure used to derive the classification according to Regulation (EC) No. 1272/2008 [CLP/GHS] Classification Justification Aquatic Acute 1, H400 Aquatic Chronic 1, H410 Calculation method Calculation method Full text of abbreviated H statements H302 H400 H410 Harmful if swallowed. Very toxic to aquatic life. Very toxic to aquatic life with long lasting effects. Full text of classifications [CLP/GHS] Acute Tox.