Datasheet

Page 1 of 5
No-Clean Desoldering Braid
RND 560-00195
RND 560-00196
RND 560-00197
Desoldering braid (wick) is pre - fluxed copper braid that is used to remove solder which allows components
to be replaced and excess solder to be removed. RND wick is available in static dissipative bobbins for static
sensitive environments.
No-clean flux braid -- cleanest in the
industry!
NoClean wick does not leave behind ionic flux residues
that can collect and form branches called “dendrites”.
Other fluxes, if not cleaned properly, can cause
dendrites to grow over time and eventually cause
short circuits between traces or leads. Latent failures
lead to costly returns and lower the quality perception
of your products.
Size Chart:
RND No. Width (mm) Length (m)
560-00195 1,4 1,5
560-00196 1,9 1,5
560-00197 2,5 1,5
• No-clean flux coated braid
• Cleanest wick -- clear, non-reactive residues
• Will not leave ionic residue -- avoid dendrite failure
• Anti-static spool
Specifications:
• MIL-F-14256
• IPC Standard-J-S TD -004
RND 560-00195
Width: 1,4mm
Length: 1,5m
RND 560-00196
Width: 1,9mm
Length: 1,5m
RND 560-00197
Width: 2,5mm
Length: 1,5m
Distrelec Schweiz, Zweigniederlassung
der Dätwyler Schweiz AG
Grabenstrasse 6
CH-8606 Nänikon
www.distrelec.ch
Page 1
2,5mm
1,5m
RND 560-00197
No-clean
Desoldering Braid
RoHS
Compliant
Antistatic
Bobbin
1,9mm
1,5m
No-clean
Desoldering Braid
RoHS
Compliant
RND 560-00196
Antistatic
Bobbin
1,4mm
1,5m
No-clean
Desoldering Braid
RoHS
Compliant
RND 560-00195
Antistatic
Bobbin
2,5mm
1,5m
RND 560-00197
No-clean
Desoldering Braid
RoHS
Compliant
Antistatic
Bobbin
1,9mm
1,5m
No-clean
Desoldering Braid
RoHS
Compliant
RND 560-00196
Antistatic
Bobbin
1,4mm
1,5m
No-clean
Desoldering Braid
RoHS
Compliant
RND 560-00195
Antistatic
Bobbin