User Manual

Features:
 Made of imported corrosion and heat resistant alloy materials with long life
 Suitable for lead free work
 Rapid temperature rising and good heat transfer
 Accurate and stable temperature control
Specifications:
Rating power: 300W
Temperature range: 200-420℃
Melting time : 10-30 minutes
Max solder weight :1350g
Solder pot size: 80mm diameter
Input voltage : AC220V-240V 50Hz
Operating Instructions:
 Make sure the pot is properly earthed. Do not put any other liquid in the pot.
 After power it up, turn the knob to the high temperature setting to melt the tin. When the
tin turns into liquid, turn the knob back to your desired temperature. The best working
temperature for liquid tin is 300-350℃
 Do not set the pot temperature too high, for this will shorten its life. When under high
temperature, the liquid tin will also turn black or yellow, and the pot may get leaked.
Attention:
 The manufacturer assumes no liability for uses other than those described in the operating
instructions or for unauthorized alterations.
 The operating instructions and cautions should be read carefully and kept in an easily visible
location near the solder pot. Non-compliance to the cautions can result in accidents, injury
or other health risks.
 The power cord should only be used with compatible sockets or adapters.
 Before use, the pot should be carefully inspected for damage. Make sure that all power
connections are properly secured. Damaged parts must be repaired or replaced by a
qualified technician.
 When the solder pot is used for the first time, there will be wisps of smoke. It is normal and
non-hazardous.
Lead Free Solder Pot
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com