Datasheet
Table Of Contents
![](/manual/rnd-lab/rnd-560-00220/datasheet-english/images/img-1.png)
Soldering Iron for RND 560-00155
Art. Nr.
RND 560-00220
Features
• An ergonomic handle with shorter distance between heating
element and tip gets very fast heat up time and quick heat compensation
• A high-quality sensor and heat transfer technology ensure precise temperature
regulation, which is essential for making consistent, reliable soldered connections
• The temperature is maintained within +/-3°C (+/- 6°C) of its
operating temperature by a thermocouple sensor placed in thehead
of the heating element, allowing the tip to rest against the sensor
Specification
Output Power
100 W
Supply Voltage 230 V
Melting Point 220°C
Normal Operation
300 ... 360°C
Product Line Operation 360 ... 410°C
Plug Type CEE, 6 Pole
Working Temperature
• To meet RoHS requirements, the 60/40 solder alloys are not allowed in the production process
• The lead free solder alloys require a working temperature of 300°C ( 540°F) higher than previous generation electrical solder
• The working temperature of solder is detailed below and can vary from manufacturer to manufacturer
• When the iron’s working temperature is set within the parameters suitable for the type of solder being used, a good joint is assured
• Too low of a temperature will slow the rate of solder flow while a high temperature setting might burn the flux in the solder and emit a
heavy, white smoke resulting in a dry joint or permanent damage to the printed circuit board (PCB) and may also shorten the tip life
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T +41 44 944 99 11, info@distrelec.com, distrelec.com