Datasheet

Bubbleshield Bags
Test Conclusion (Date of Issue: 2009-05-12)
The anti-static bubbleshield bag is tested accordance with the relevant test standard and requirements.
Test Item Test Method Measured Equipment(s) MDL
Lead (Pb) IEC 62321:2008 Ed.1 Sec.8 ICP-OES 2mg/kg
Cadmium (Cd) IEC 62321:2008 Ed.1 Sec.8 ICP-OES 2mg/kg
Mercury (Hg) IEC 62321:2008 Ed.1 Sec.7 ICP-OES 2mg/kg
Hexavalent Chromium (Cr(VI)) IEC 62321:2008 Ed.1 Annex C UV-Vis 2mg/kg
Polybrominated Biphenyls (PBBs) IEC 62321:2008 Ed.1 Annex A GC-MS 5mg/kg
Polybrominated Diphenyl Ethers (PBDEs) IEC 62321:2008 Ed.1 Annex A GC-MS 5mg/kg
Technical Properties Test Standard Result
Film Composition N/A PET-AL/PP
Outer Layer Thickness Micron Meter 7 micron
Bubble Layer Thickness Micron Meter 60 micron
Inner Layer Micron Meter 35 micron
Puncture Strength FTMS 101 14lbs
Tensile Strength ASTM D882 35lbs/inch width
Light Transmission ASTM D1003 41%
Interior Surface Resistivity ASTM D257 10
8
Ω
Exterior Surface Resistivity ASTM D257 10
9
Ω
Metalized Layer Resistivity ASTM D257 8Ω
Static Decay EIA-541 0.2secs
Remains Voltage EIA-541 24V
Physiological clearance certicate of used raw material Bgvv, EU, FDA Yes
Test Conditions
The following results were taken under the following environmental test conditions:
Temperature: 22.3
o
C / Humidity: 47.5%
Product Code Size (inches) Size (mm) Additional Notes
RND 600-00052 8 x 10 203 x 254 Pack of 100
RND is a trademark of Distrelec