Datasheet
Image shown for
illustration
purposes only
.
ESD Heel Strap with Clip
Features
• Clip type with snap release - easy to wear and take off
• Double layered conductive cup (3.5mm x 230mm)
• Each heel grounder incorporates a 1 Meg Ohm safety resistor
• All Heel Grounders are designed for use in conjunction with ESD
flooring or mats
• Recommended to be worn on both feet
• Reusable and can be washed by hand in mild detergents
• Conforms to the requirements of ANSI/ESD S-20.20, EIA 625
• Hard wearing heel grounders designed for long term use
Notes: The heel grounder must be tested from time to time using the footwear
test station.
Specification
Details
Outer conductive surface (black)
Inner anti-static surface (grey)
Conductive tab (blue)
Overall resistivity
Resistance
1Meg resistor built in
Product Code Description Size Additional notes
RND 600-00099 Heel Grounder with Clip One size Each
RND 600-00100 Heel Grounder with Clip One size 1 Pair
10
3
- 10
5
Ω
10
7
- 10
8
Ω
10
3
- 10
4
Ω
10
6
Ω
RND is a trademark of Distrelec