Datasheet

ESD Waste Sacks
Description
Our ESD refuse sacks are suitable for holding waste in an EPA. Specifically
designed for the particular needs of the electronics industry. The special
additives used do not effect the film clarity or quality, and it is therefore most
economical in use, as the standard film thickness can be selected.
Features
• Our ESD refuse sacks are made of antistatic polyethylene
∙ Printed in black (printed in white on the black bags)
with ESD caution logo and text onto polyethylene
∙ Supplied in packs of 100
∙ Homogeneous, non-amine antistatic polythene
film which is effective at low relative humidities
(less than 12%).
Technical Properties Details
Thickness 130 Gauge – 32.5 Microns
Tensile Strength (ASTM D 882) 1500 to 3000 psi
Tear Strength (ASTM D 1004) 65 to 450lbs/inch
Elongation (ASTM D 882) MD: 550
Dart Impact (ASTM D 3420) 250-750 grms
Burst (Mullen) (ASTM D 3420) 20 – 60 psi
Heating Sealing (ASTM D 882) Temperature: 250-375˚F
Time .25 – 3.5 seconds
Pressure 30-60 psi
Electrical Properties Details
Surface Resistivity (Inside/Outside) at 28.8˚C and 12% RH < 10
11
ohms/sq
Static Decay Rate (5000 volts to 0 volts at 28.8˚C and 12% RH) <2 seconds
Product Code Description Size Additional Details
RND 600-00171 ESD Waste Sack - Pink 110 Litre Pack of 100
RND is a trademark of Distrelec