Datasheet

ESD Flux Bottle
Description
New development process of moulding polyethylene bottles utilising
a concentrate that does not contain any Exthoxylated Tertiary Amine,
which is widely used as an antistatic agent. These ESD safe bottles have
an average surface resistivity of 10

to 10
10
Ω/square and do not have any
less desirable features associated with surfactant laden material. These
bottles will dissipate a static charge of ±5000V in less than two seconds
at 40% relative humidity. By their chemical nature, they will not have any
chemical reactivity with solvents as TCE or alcohol.
The pH of the deionised water solutions tested were that same before
and after a seven day period. No colour change or any other physical
change was noted for any solvents tested. Competitively priced with
existing static generating containers.
Features
• Static Free
• Non-Greasy
• No Tertiary Amines
• Humidity Independent
• Average Surface Resistivity of 109 to 1010 Ω/Square
• Helps to Meet ESD-T20.20-2000
Product Code Description Size Additional Details
RND 600-00173 ESD Flux Bottle 2oz Bottle - 26 Gauge Needle EACH
RND 600-00174 ESD Flux Bottle 2oz Bottle - 20 Gauge Needle EACH
RND is a trademark of Distrelec