Datasheet
Film Rollers
Description
Each sheet consists of .0015” thick low density 100% Polyethylene
coated with a water based adhesive. Each roll has a 100%
Polyethelyene covering, .003” thick. Adhesive level
(water based acrylic) of sheet is 12 oz per inch with stainless steel
method according to PSTC-1 (pressure sensitive tape council).
Features
• Cheminstrument testing machine used to determine various tac
levels (roller ball)
• Each sheet incorporates an anti-microbial agent providing long
lasting protection against bacterial growth
• A starrett micrometer issued to test thickness of the lm
Ingredients
Polyethylene Resin
Not generally considered as hazardous in the form supplied.
Ployethylene Film does not contain toxic chemicals.
180 Degree Peel Adhesion, PSTC NO. 1 (OZ/IN) Adhesive Type
Boiling Point
N/A
VA. Press
N/A
VAP Density
N/A
SOL in Water
N/A
SP Gravity
N/A
Appearance
Plastic Film, Clear of Coloured
Odour
Odourless
Extinguishing Media
Water Fog, Foam, CO
2
, Dry Chemical Fire & Explosion Hazards: Dense smoke may be emitted when burned
Fire-ghting Equipment: Wear positive-pressure, self contained breathing apparatus.
REACTIVITY DATA
Stability
Avoid heat and ames
Incompatibility
(Specic materials to avoid) None known
Hazardous Decomposition Products
Same as for ordinary combustibles: Carbon
Monoxide, Aliphatic Hydrocarbons, Organic Acids
and Aldehydes
Hazardous Polymerization
Will not occur
Disposal methods
Bury in landll or incinerate in accordance with local
regulations
Physical Data
RND is a trademark of Distrelec