Datasheet

• High heat resistance
• Excellent solvent resistance
• Neither corrosive nor ozone depleting
• 33 m length
Image shown for
illustration
purposes only
.
High Temperature Masking
Tapes with Dots
Description
High temperature masking tape and dots are ideal for masking gold fingers of
printed circuit boards during wave solder or solder dip process, as well as for solder
wave masking and electrical insulation.
This high temperature tape is a polyimide, pressure sensitive, adhesive tape with
silicon resin, which shows excellent dielectric insulation properties, high heat
resistance and excellent solvent resistance. These properties result in a tape with
remarkable dimensional stability and excellent electrical and physical properties
over a wide range of temperatures.
High temperature masking dots are composed of a polyimide film masking dots with
silicone adhesive on a clear easy release liner. High temperature masking dots are
both flame and chemical resistant.
This product is neither corrosive nor ozone depleting and is both flame and chemical
resistant.
DIN Value ASTM Value
Structure Silicone Adhesive / Polyamide Film
Base Film Thickness 0.025mm 1.0MIL
Total Thickness 0.070mm 2.8.MIL
Peel Strength 2.7N/cm 25oz/In
Tensile Strength 40N/cm 22lbs/In
Elongation 50% 50%
Heat Resistance (Short Term)
290
O
C
554
O
C
Heat Resistance (Long Term) 230
O
C 446
O
C
Appearance Amber Amber
Product Code Description Dot Diameter (mm) Additional Notes
RND 605-00046 High Temperature Masking Tape with Dots 6 Per roll
RND 605-00047 High Temperature Masking Tape with Dots 8 Per roll
RND 605-00048 High Temperature Masking Tape with Dots 10 Per roll
RND 605-00049
High Temperature Masking Tape with Dots 12 Per roll
Features
RND is a trademark of Distrelec