Datasheet

SPECIFICATION
:
Funcon
Cooling spray
Delivery form
Spray
Content
200 ml
Colour
colourless
Freezer
FEATURES:
Powerful Non-corrosive refrigerant
For use as a rapid and safe method of cooling small components, particularly in
electrical and electronic equipment
For the testing of thermostats and other thermosensitive components and to
detect faulty soldered joints and overheating components
Spray 200 ml
Flash Point
None
Boiling Point
-19 ˚C
GWP (vs. CO
2
, 100yr ITH)
6
Photochemical Reactivity (MIRg O
3
/gVOC)
0.09
Photochemical Ozone Creation Potential (POCP)
6.4
Switch on and set up equipment so that the fault conditions caused by the 'dry'
joint exist. Spray each joint in the circuit with the end of the extension tube
approximately one inch from the joint. Spraying should continue until a layer of 'frost'
appears on the joint, usually about 2 seconds.
When the 'dry' joint is frozen, the fault condition will disappear but will return
as the temperature of the joint returns to normal ambient. A similar procedure is
adopted for tracing faulty components that are overheating.
Art. Nr.
RND 605-00137
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com