Datasheet

COVID-19 Safety Signs
RND is a trademark of Distrelec
General
Surface printed white polyester film with a permanent, acrylic based, pressure sensitive adhesive and overlaminated with a clear
polyester film.
Applications
• Used for pipemarkers and safety signs
• Gives excellent adhesion to low surface energy surfaces, such as polypropylene and ABS, as well as on most powder coatings
• Standard ink colors are black, red (RAL 3001GL), yellow (RAL 1003GL), blue (RAL5005GL) and green (RAL 6032GL)
ROHS Environmental Compliance
RoHS compliant to RoHS directive 2011/65/EU
Details
PHYSICAL PROPERTIES TEST METHODS AVERAGE RESULTS
Thickness ASTM D 1000
-Substrate
-Adhesive
-Total
0.100 mm (0.003 inch)
0.020 mm (0.001 inch)
0.120 mm (0.004 inch)
Adhesion to: -
Stainless Steel
-Polypropylene
-Smooth ABS
-Textured ABS
-Powder Coated
ASTM D 1000
20 minute dwell
24 hours dwell
20 minute dwell
24 hours dwell
20 minute dwell
24 hours dwell
20 minute dwell
24 hours dwell
20 minute dwell
24 hours dwell
69 N/100 mm
77 N /100 mm
55 N/100 mm
62 N/100 mm
74 N/100 mm
92 N/100 mm
14 N/100 mm
21N/100 mm
76 N/100 mm
81 N/100 mm
Tack ASTM D 2979
Polyken™ Probe Tack
(1 second dwell, 1 cm/sec separation)
578 g (20.4 oz)
Drop Shear PSTC-7 3 hours
Printed samples laminated to aluminium and allowed to dwell for 24 hours before exposure to the indicated environments.
PERFORMANCE PROPERTIES TEST METHODS TYPICAL RESULTS
High service temperature Short term (1h) at 140°C (285°F) No visible effect
Long term (30 days) at 110°C (230°F) Long
term (30 days) at 130°C (266°F)
No visible effect
red:no visible effect
black: becomes more matt yellow
& green: became darker blue:
became much darker
Low service temperature 30 days at -40°C (-40°F) No visible effect
Minimum application temperature
10°C (50°F)
Humidity Resistance 30 days humidity chamber at 38°
C (100°F) and 95% R.H.
No visible effect
Weatherability ASTM G 53
30 days QUV
Yellow & red : very light darkening*
Green, blue & black : no visible effect
UV Resistance 30 days exposure to UV light
Yellow & red : very light darkening*
Green, blue & black : no visible effect
* -
In all cases the discoloration was less than the maximum allowed delta E for safety colors.