USER MANUAL RND 315-00011 RND 315-00016 AC-DC DIN RAIL MOUNTED POWER SUPPLY 240W
RND 315-00011, 315-00016 — AC-DC DIN RAIL MOUNTED POWER SUPPLY din rail power supply PRODUCT SPECIFICATION din rail power supply PRODUCT SPECIFICATION Electrical AC-DC Din Rail Mountable Power Supply IS-240 SERIES, SINGLE PHASE INPUT SINGLE PHASE INPUT Features Part Number Nominal Input Voltage Output Voltage Output Current Ripple (Max.) Efficiency (Typ.
RND 315-00011, 315-00016 — AC-DC DIN RAIL MOUNTED POWER SUPPLY din rail power supply PRODUCT SPECIFICATION CONDITIONS MIN TYP Output voltage accuracy MAX 2 IS240-24 RND 315-00011 IS240-48 RND 315-00016 Output voltage adjustment range UNITS % V V 22-28 47-55 45-55 Output voltage can be adjusted within above range by V-ADJ. variable resistance inside of the power supply. When output voltage exceeds the range, the power supply will be in failure or get into over voltage protection mode.
PRODUCT SPECIFICATION din rail power supply PRODUCT SPECIFICATION RND 315-00011, 315-00016 — AC-DC DIN RAIL MOUNTED POWER SUPPLY din rail power supply din rail power supply PRODUCT SPECIFICATION Mechanical Mechanical +70 ℃ Operating relative humidity Non condensing 20 95 % Storage temperature Humidity 5 ~ 95% RH - 40 + 85 ℃ MTBF Full load, 220Vac input, 25℃ ambient temperature 230 DC-OK led LED(Green) DC OK LED light will be ON when properly operated Khrs DIN Rail (Width: 35mm) DIN R
RND 315-00011, 315-00016 — AC-DC DIN RAIL MOUNTED POWER SUPPLY din rail power supply PRODUCT SPECIFICATION Electrical Curve din rail power supply PRODUCT SPECIFICATION Application Note 100 90 90 80 80 Load(%) Load(%) 1.
RND 315-00011, 315-00016 — AC-DC DIN RAIL MOUNTED POWER SUPPLY din rail power supply PRODUCT SPECIFICATION Application Note PRODUCT SPECIFICATION din rail power supply Application Note 2. Parallel Operation 3. Mounting Method (1) How to fix Firstly hang A part on the top of Rail as shown in below, then push the power supply into B direction to fix it.
RND 315-00011, 315-00016 — AC-DC DIN RAIL MOUNTED POWER SUPPLY din rail power supply PRODUCT SPECIFICATION PRODUCT SPECIFICATION din rail power supply Application Note Application Note 4. Cautions 3. Mounting Method (3) Mounting Spacing Mounting method should be considered with airflow. Leave enough space between the units when several units are mounted together. Forced air cooling makes protection against heat better.
