User's Manual

Embedding

4 3 2 1

1 2 3 4 5 6 7 8

3. The white green CAN_H

wire goes to pin 2 and the

white orange CAN_L wire

goes to pin 3. Leave pin 1

and pin 4 empty.

4. Squeeze the crimp areas of the Drop Plugs with the Split

Joint Pliers.

5. Locate the drop tap (not

included) on the RV-C bus

that is the closest to the

Renogy ONE installation

location. The drop taps

are usually located above

the entry door, in the

bathroom, or under the

bed in the RV.

Drop Tap

6. Connect either of the CAN

Communication Ports

of the Renogy ONE and

other REGO devices to the

drop sockets on the drop

tap with the Drop Cables.

12V Power Cable Communication Cables External Load