User's Manual
Table Of Contents
- Important Safety Information
- Introduction
- Package Contents
- Product Overview
- Wiring Diagram
- Communication Diagram
- Preparation
- Embedding
- Wiring
- Mounting
- Activation
- Operation
- Power On/Off
- Control External Loads
- Troubleshooting
- Frequently Asked Questions
- Maintenance
- Emergency Responses
- Technical Support
- Technical Specifications
- Dimensions
28
Embedding
WARNIN
G
z
Please ensure that the working current of an external DC load is less than or equal to 5A;
otherwise Renogy ONE may be damaged.
z
Please ensure that the output voltage of the DC power supply for an external DC load is less
than or equal to 30V; otherwise Renogy ONE may be damaged.
z
Make sure the DC power supply is powered off before connection.
z
Please confirm the polarity of the DC power supply device before connection. A reverse
polarity contact will result in abnormal operations.
z
Please confirm the polarity of the load before connection. A reverse polarity contact may
cause abnormal situation.
+
DC load
(≤30V DC, ≤5A)
2. Connect the bare wire
cable to the positive pole
of the load, and reserve
the other end in the
installation hole.
Battery Combiner Box
+
Battery Combiner Box
3. Connect the other ring
terminal of the adapter
cable to the positive
terminal of the DC power
supply device, and reserve
the other end in the
installation hole.
12V Power Cable Communication Cables External Load