User Manual
Safety Instructions If you find some inconsistencyin this manual during use, please consult the technical support department. The content will be updated over time to time without notice. Installation Precautions In order to ensure the normal operation of the equipment, to extend its service life, please ensure that it meets the specifications during installation.
Table of Contents One, 1. 2. 3. Product Brief.............................................................................................................. 4 product description ................................................................................................... 4 feature of product ...................................................................................................... 4 Appearance description.....................................................................................
One, Product Brief 1. Product description The product is a full HD vehicles driving recorder with intelligent analysis systemintegrated, supporting the following functions:Driver status monitoring and warning (DMS), forward collision warning (forward ADAS), blind zone detection and warning (BSD), hands off the steering wheel (HOD), overcrowded aisle detection (OCD),support for GPS positioning, 4G network communication module, multi-channel video surveillance etc.
Deep learning technology: accurate target recognition and fast iteration update Support the latest neural network in the industry 3. Appearance description 3.1. Host view Infrared receiver Hard disk lock LCD display Printer button 4. 5. 图 1:主机正面图示 6. Front cover 7. Driver identification IC card slot Figure 1: Front view of the host Mini USB port USBport Front serial port Harddisk compartm SD card slot 1 SD card slot 2 SIMcard slot Figure 2: Opening position of the host 7.1.
power cable Communication Interface Disaster recovery GPS Antenna IO 4GAntenna Video/Audio output Figure3: Host Rear panel icon 7.2. System connection diagram Figure4: System connection Note: The solution is flexible and can be customized according to customer needs. One, Product configuration list 1.
1 AI-5-E host 1 station 2 power cable 1 root 3 GPS antenna 1 root 4 4G antenna 1 root 5 Host bracket 2 A 4 Piece string Mounting screws for 6 mainframe bracket 7 Door lock key 1 8 Triangle certificate 1 9 Driver Identification Card 2 10 Cross countersunk flat head screws 2× fixed hard disk and hard 6 A disk box 4×Fixed bracket and host Table 1: Product standard list 2. Product accessories 2.1.
Continued Table 2:OptionChecklist 2.2. Configuration reference The product configuration is flexible. The following simplified configurations are for reference only. For details, please contact sales or technical support. 3. Equipment harness A variety of functions combination selection. For details, please contact sales or technical support. 3.1.
Figure6: Communication Harness-Full P1 Teana 32P Female Pin Label content hread colo Pin hread col 1 GND black 10 Emergency alarm/SOS green 19 Speed/Speed In blue 28 GND 2 Low beam/Low Beam green 11 12V output/12V Out red 20 RS232_RX blue 29 TX+ 3 +5V red 12 12V-1 blue 21 Turn Left green 30 TX- 4 Turn right green 13 Analog input 1/Analog In green 22 CAN1_H blue 31 RX+ 5 RS232_TX green 14 23 High beam/High Beam green 32 RX- 6 Brake/Brake green 15Analog
Table 5: Audio and video wiring harness full pin definition 10
Three, Product function overview 1. Remote control introduction This product can be optionally equipped with CVBS screen, and use the remote control to change various settings of the device. 2.
Function type Function Description Voice prompts Driver status monitoring When it is found that the driver enters the doze state and Fatigue driving "You are tired, please be exceeds the set warning threshold, the device sends out an warning safe" alarm When the driver's attention is not focused on the road ahead, Distracted including the occurrence of head-up, head-down, and left-right "Please pay attention to driving warning look,yawn, the device sounds an alarm when looking down at a the fron
detection wheel, the device will issue a warning both hands" OCD: Overcrowded Detection "Do not stand in the When the aisle is overrun, the device will issue a warning aisle" Rapid acceleration, abrupt deceleration, sharp turn, vehicle According to the marked rollover driving instructions Aisle overrun Intense driving Continued Table 6: Features introduction 3.
Support positioning antenna open circuit and short circuit detection RS232 stand by5×RS232, baud rate adjustable, 3 of which are multiplexed RS485 stand by1×RS485 CAN stand by2×CAN communication, adjustable baud rate Ethernet Provide IPC network sharing Infrared Support 1× infrared receiver DI stand by8×Digital input+1Pulse input DO stand by3×5VDigital output AD stand by2×Analog Detectable0-36VVoltage powered by stand by12Vwith5V pair external power supply input, accuracy12bit, Table 8:s
manage fleet inreal-time and understand the running state of the vehicle. 2. Drivers can use this product to reduce the possibility of traffic accidents caused by manual driving, but they cannot replace safe driving. 3. Installation and calibration will affect the identification and response of the system. The installation and calibration must be carried out by a dealer or professional installer authorized by our company during installation. 4.