User's Manual
Table Of Contents
- Safety Instructions
- Installation Precautions
- 1.PRODUCT INTRODUCTION
- 2.PRODUCT FEATURES
- 3.APPEARANCE DESCRIPTION
- 4.PRODUCT CONFIGURATION LIST
- 5.PRODUCT FUNCTION OVERVIEW
- 6.INSTALLATION PREPARATION
- 7.LIST OF INSTALLATION TOOLS
- 8.INSTALLATION GUIDANCE AND PRECAUTIONS
- 9.USE OF WEB APP CONFIGURATION TOOLS
- 10.USER NOTICE
19
figure 6: Installation of SIM and SD Card
8.2. INSTALL DMS CAMERA
8.2.1. Installation position requirements
The DMS camera is installed on the dashboard in front of the driver, within 60cm~120cm from the driver's face, and the
included angle with the normal of the face when the driver looks forward is required to be less than ± 30 °; The included angle
with the face normal in the vertical direction is less than 30 °, as shown in Figure 7 below.
Figure 7: DMS C
amera Position
8.2.2.
Camera fixing and angle adjustment
After selecting the installation position, use four self tapping screws to fix the camera bracket on the dashboard, as shown in
Figure 8. The installer should fasten the safety belt and sit well according to the driver's driving posture, connect to the
powered on host through the mobile phone web tool, view the DMS live image. According to the live image, and adjust the
SD CARD2
SIM CARD
SD CARD1