User's Manual
Table Of Contents
- Safety Instructions
- Installation Precautions
- 1.PRODUCT INTRODUCTION
- 2.PRODUCT FEATURES
- 3.APPEARANCE DESCRIPTION
- 4.PRODUCT CONFIGURATION LIST
- 5.PRODUCT FUNCTION OVERVIEW
- 6.INSTALLATION PREPARATION
- 7.LIST OF INSTALLATION TOOLS
- 8.INSTALLATION GUIDANCE AND PRECAUTIONS
- 9.USE OF WEB APP CONFIGURATION TOOLS
- 10.USER NOTICE
25
8.5.2.
Install GPS Antenna
The installation position of GPS antenna is preferentially selected on the roof, and the harness can enter
the vehicle through punching or along the door gap. If it cannot be installed on the roof, it is recommended
to install it on the console in front of the passenger seat, as close to the window as possible. More than
50cm away from the electronic device, pay attention to the antenna receiving surface facing upward, and
tear off the 3M adhesive protective sticker and stick it on the console, as shown in Figure 18 below, to
ensure that the antenna is stable during driving, and it is strictly prohibited to stick the GPS antenna to the
device.
Figure 18
：
BSD Antenna Installation
9. USE OF WEB APP CONFIGURATION TOOLS
9.1. LOGIN
9.1.1. Connect WiFi
When the mobile phone opens the WiFi connection interface, you can see the WiFi name of "ai8box- the
last six digits of the device number", such as ai8box-000949. Connect to this WiFi, and all the WiFi
passwords of ai-8-box are unified as 12345678,Go to the next step after the connection is successful