Owner manual
CHECK
OWNER S MANUAL
,
EPB Service Tool
10
Select Function
=================================== 2/4
1) Read Codes
2) Erase Codes
3) Deactivate Brake
4) Activate Brake
This function is performed with key on engine off
(KOEO)
. Do not start the
engine.
1). Use
UP/DOWN
button to select Erase Codes from Diagnostics Menu and
press
Y
button.
2). A warning message comes up asking for your confirmation.
Erase Codes
======================================
Erase trouble codes!
Are you sure?
YES NO
If you do not wish to proceed to erase the codes, press
N
button or
use
UP/DOWN
button to select
NO
and then press Y button to exit. A
"Command Canceled!"
message shows up. Press any key or wait a few
seconds to return.
3). Press
Y
button to erase.
If the codes are cleared successfully, an
"Erase Done!"
message shows
up.
If the codes are not cleared, then an
"Erase Failure. Turn Key on with
Engine off!"
message displays.
C. Deactivate Brake
WARNING:
Deactivate the
EPB
system before carrying out any
maintenance/service work on the brakes such as changing of pads, discs and
cali pers!
Use proper tools to avoid the risk of body injuries of mechanics and
technicians and damage to the brake system.
Make sure the vehicle is properly blocked before deactivation of the system.
1) To deactivate the EPB functions, use
UP/DOWN
button to select
Deactivate Brake from Select Function
menu and press
Y
button.