Owner manual
CHECK
OWNER S MANUAL
,
EPB Service Tool
12
4). Press any key or wait a few seconds to return to previous menu.
D. Activate Brake
WARNING:
The EPB system must be activated after finishing the
maintenance/service work on the brakes.
Make sure the vehicle is properly blocked before activation of the system.
1). To close the brake pads after finishing the maintenance/service work on
the brakes, use
UP/DOWN
button to select
Activate Brake
from
Select
Function
menu and press
Y
button.
Select Function
=================================== 4/5
1) Read Codes
2) Erase Codes
3) Deactivate Brake
4) Activate Brake
2). Wait a few minutes while the device is activating the brakes. When they
are activated successfully, following screen shows:
Activate Brake
Activate Brake
======================================
======================================
Activation Done!
Go to Adaptation?
YES NO
Activation Done!
Press any key to con.
Note: It is necessary to do the adaptation only when brake pads have been
changed. So if you did not change them, please use
UP/DOWN
button to
select
NO
to exit.
If you use the device to work on Audi A6 and VW Passat, following screen
shows after the activation is completed:
If the tool fails to open the brake pads, an
"Activation Failed! Please
try again!"
message comes up.
- Verify that the ignition is ON;