Owner manual

CHECK
OWNER S MANUAL
,
EPB Service Tool
15
4.2 Diagnose Mercedes SBC
The EPB Service Tool is able to deactivate/activate SBC functions,
change brake fluid/bleed brake system, inspect brake air, read/clear
SBC trouble codes, and retrieve ECU information on Mercedes
vehicles that are equipped with SBC system.
1). Use
UP/DOWN
button to select
SBC-Mercedes
from
Diagnostic
Menu
and press
Y
button to confirm.
Diagnostic Menu
Select Function
=================================== 1/3
=================================== 1/7
1) EPB-Audi A8
2) EPB-Other VAG
3) SBC-Mercedes
1) Read Codes
2) Erase Codes
3) Deactivate Brake
4) Activate Brake
2). Wait a few seconds while the device is communicating with the vehicle
until following screen shows.
If the brake tool fails to communicate with the vehicle
,
s ECU (Engine
Control Unit), a
"LINK ERROR!"
message shows up on the display.
Verify that the ignition is ON;
Check if the brake tool's OBD II connector is securely connected to the
vehicle's DLC;
Turn the ignition off and turn it back on 10s later.
If the
"LINK ERROR!"
message does not go away, then there mig ht
be problems for the brake tool to communicate with the vehicle. Contact
your local distributor or the manufacturer's customer service department for
assistance.
3). To exit the SBC test, press
N
button from
Select Function
menu, and a
prompt comes up asking your confirmation.