Owner manual

CHECK
OWNER S MANUAL
,
EPB Service Tool
16
Exit Test
======================================
Exit SBC Test!
Are you sure?
YES NO
4). Press
Y
button to confirm if you do wish to exit; if you do not wish to
return, press
N
button or use
UP/DOWN
button to select
NO
and then press
Y
button to continue.
A. Reading Codes
1). Use
UP/DOWN
button to select
Read Codes
from
Select Function
menu and press
Y
button to confirm.
Select Function
=================================== 1/7
1) Read Codes
2) Erase Codes
3) Deactivate Brake
4) Activate Brake
2). View DTCs and their definitions on screen. If the code definition covers
more than one screen, use
Y
button to turn to next page(s) to view additional
information.
======================================
Control unit A7/3n1
(SBC control unit),
Internal fault
C2117
stored 2/3
The sequence of the DTCs, total number of codes detected and type of
codes (stored or current) will be observed on the display.
3). When more than one DTC is found, use
UP/DOWN
button, as necessary,
until all the codes have been shown up.
If no codes are detected, a
"No codes are stored in the module!"
message displays on the screen.
If the code definition is not found in the built in DTC library, a
"DTC
definitions not found! Please refer to vehicle service manual!"