Owner manual

CHECK
OWNER S MANUAL
,
EPB Service Tool
17
Select Function
=================================== 2/7
1) Read Codes
2) Erase Codes
3) Deactivate Brake
4) Activate Brake
message comes up prompting you to look up the definition in the vehicle
service manual.
4). Press
N
button to return to previous menu.
B. Erasing Codes
CAUTION:
Do not erase the codes before the system has been checked
completely by a technician.
This function is performed with key on engine off (KOEO). Do not start the
engine.
1). Use
UP/DOWN
button to select
Erase Codes
from
Select Menu
and
press
Y
button.
2). A warning message comes up asking for your confirmation.
Exit Test
======================================
Erase trouble codes!
Are you sure?
YES NO
If you do not wish to proceed to erase the codes, press
N
button or
use
UP/DOWN
button to select
NO
and then press
Y
button to exit. A
"Command Canceled!"
message shows up. Press any key or wait a few
seconds to return.
3). Press
Y
button to erase.
If the codes are cleared successfully, an
"Erase Done!"
message shows
up.
If the codes are not cleared, then an
"Erase Failure. Turn Key on with
Engine off!"
message displays.