Owner manual

CHECK
OWNER S MANUAL
,
EPB Service Tool
18
C. Deactivate Brake
WARNING:
Deactivate the
SBC
system before carrying out any
maintenance/service work on the brakes such as changing of pads, discs and
fluids.
Use proper tools to avoid the risk of body injuries of mechanics and
technicians and damage to the brake system.
Make sure the vehicle is properly blocked before deactivation of the system.
1). To open the brake pads, use
UP/DOWN
button to select
Deactivate
Brake
from
Select Function
menu and press
Y
button.
Select Function
=================================== 3/7
1) Read Codes
2) Erase Codes
3) Deactivate Brake
4) Activate Brake
2). Wait a few minutes while the tool is deactivating. When the brakes are
deactivated successfully, following screen shows:
Deactivate Brake
=================================== 3/7
Deactivation Done!
Press any key to con.
If the tool fails to open the brake pads, a
"Deactivation Failed! Press
any key to con."
message shows.
3). Press any key to return to previous menu.
D. Activate Brake
CAUTION:
The SBC system must be activated after finishing the
maintenance/service work on the brakes.
Make sure the vehicle is properly blocked before activation of the system.
1). To close the brake pads after finishing the maintenance/service work on
the brakes, use
UP/DOWN
button to select
Activate Brake
from
Select
Function
menu and press
Y
button.